Toshiba E-Studio167, e-Studio237, E-STUDIO207 Features of e-STUDIO167/207/237

Features of e-STUDIO167/207/237

The black-and-white copier, the e-STUDIO167/207/237 has realized the copying speed of 16

copies per minute*1(the e-STUDIO167), 20 copies per minute*1 (the e-STUDIO207) and 23 cop-

ies per minute*1 (the e-STUDIO237). They can all serve as a printer and a scanner when they

are connected to your PC with a USB cable. *2, *3

The e-STUDIO167/207/237 also has functions as a Fax, a network scanner and a network

printer, namely, it remarkably saves time and space at your workplace.

yThe receiving tray is relocated to the equipment’s inner side, occupying as little space as

possible.

yOperability of the control panel has been upgraded with its larger buttons and LCD screen.

yA wide range of paper sizes from LD to ST-R are acceptable.

yThe bypass tray equipped as a standard unit makes copying on various media types such as

overhead transparencies possible.

yScanning data with a TWAIN driver is enabled as a standard function.

yA rich variety of convenient copying functions are adopted.

yThe Reversing Automatic Document Feeder (RADF) / Automatic Document Feeder (ADF)

dramatically saves the time when you need to copy massive amounts of originals.

yThe Scanner Upgrade Kit promotes paperless at your office.

yThe Fax Kit can add a function as a Fax machine.

yThe Network Printer Kit works as a shared printer at your office.

yThe Paper Feed Unit (PFU), the Paper Feed Pedestal (PFP) and the Drawer Module can

add maximum 4 more drawers.

yThe toner recycling system in which used toner is recovered and reused is adopted.

yIts warm-up time has become be approx. 25 seconds.*4

yThe low power mode, which reduces unnecessary electric power by having the fuser unit

temperature lowered while the equipment is left inactive, is adopted.

yThe sleep mode, which maintains the smallest possible power consumption during the

equipment’s inactive period after it has not been used within a specified period of time, is

adopted.

*1 These speeds are realized in the non-sort mode, when LT originals placed in a portrait direction are con-

tinuously copied and the Reversing Automatic Document Feeder (optional) / Automatic Document

Feeder (optional) is not used.

*2 When this equipment is used as a printer, the co-packed software needs to be installed into your PC.

*3 When the equipment is used as a network printer with the Network Printer Kit (optional) installed, it can-

not be connected with your PC with a USB cable and used as a local printer.

*4 This is the value when the room temperature is 20 °C (68 °F) or more at rated power input.