Toshiba E-Studio167, e-Studio237 Description of Each Component, Front / Right side, Bypass tray

1 PREPARATION

Description of Each Component

Front / Right side

13

12

11

10

9

1

2

8

3

5

4

6

7

1.Platen Cover (optional, KA-1640PC)

Place an original on the original glass and start copying with this cover closed.

2.Reversing Automatic Document Feeder (optional, MR-3019) / Automatic Document Feeder (optional, MR-2017)

A stack of originals placed on this are scanned one sheet after another. Maximum 100 sheets (or stack height 0.62") of originals can be placed in one go. (The maximum number of sheets can be placed may vary depending on the media type of the originals.) 2-sided origi- nals can be scanned with the Reversing Automatic Document Feeder (MR-3019).

P.56 “Placing originals on Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional)”

P.180 “Paper jams within Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional)”

3.Operator’s Manual pocket (Back side) Keep the Operator’s Manual in this.

4.Side cover

5.Automatic Duplexing Unit (optional, MD-0103)

Install this to make it possible to print on both sides of paper.

6.Bypass tray

Use this to make copies on special media types such as thick paper, overhead transparen- cies or tracing paper.

P.61 “Using Bypass Tray”

P.183 “Paper jams on bypass tray”

28 Description of Each Component