Toshiba E-STUDIO207, E-Studio167, e-Studio237 manual Press Start KEY

Message	Meaning	Countermeasure
Toner not recognized	The toner cartridge is not	Install the toner cartridge correctly.
	installed correctly.
	A toner cartridge not recom-	Use a TOSHIBA-recommended toner car-
	mended by TOSHIBA is	tridge.
	being used.	If you want to use a toner cartridge other
		than the one we recommend and you feel
		annoyed by this message, contact your
		service representative.
		P.16 “Recommended toner cartridges”
Toner empty	The toner in the toner car-	Replace the toner cartridge with a new
	tridge has run out.	one.
		P.189 “Replacing Toner Cartridge”
Invalid Dept.Code	The department code	Enter the correct department code. If you
	entered in the department	do not know the department code, contact
	code entering screen is not	your administrator.
	correct.
Memory is full	The built-in memory of the	Select “Print” on the LCD screen to copy
	equipment has become full.	the data scanned so far. Select “Cancel
		job” to delete all the data scanned so far.
Clear paper output tray:	Approx. 250 sheets of paper	Remove the paper from the receiving tray,
PRESS START KEY.	have continuously exited and	and then press the [START] button. Copy-
	the equipment stops copy-	ing resumes.
	ing to prevent the copied	Press the [CLEAR/STOP] button to end
	paper from overflowing from	the copy job. “Memory clear?” appears on
	the tray.	the LCD screen. Select “YES”, and then
		press the [START] or [ENTER] button.

When This Message Appears 177