Toshiba e-Studio237, E-Studio167, E-STUDIO207 manual Changing Copy Setting on Each Job JOB Build

Changing Copy Setting on Each Job - JOB BUILD -

This function is useful for originals consisting of several jobs (= stacks). You can change settings and scanning methods for each job, and when all the originals have been scanned under the dif- ferent settings, they are copied in one go. A maximum of 250 pages can be handled in one go, and a maximum of 5 jobs can be scanned.

The setting of the density level, original mode and edge erase can be changed for each job. Some functions cannot be used together with this function or may have some restrictions.

When the following functions are set for the first job, they are also set for the rest: Paper size selection, Finishing modes, Image shift

Functions not available:

Mixed-size copying, APS, Copying booklet on both sides (“BOOK>2”), Specifying reproduction ratio manually, XY zoom, Magazine sort, Dual page, 2IN1/4IN1, ID card, Annotation

1

2

Place paper in the drawer.

Set copy quantities.

3 Select “JOB BUILD” in the copy menu, and then press the [ENTER] button.

FINISHING	DUPLEX	2IN1/4IN1
IMAGE SHIFT	DUAL PAGE	ID	CARD
EDGE ERASE	ANNOTATION	XY	ZOOM
PAPER TYPE	JOB BUILD	JOB MEMORY

Changing Copy Setting on Each Job - JOB BUILD - 101