Toshiba E-STUDIO207 Making Copies, Check if paper is placed in the drawer, Place the original

Making Copies

Follow the procedure below to make copies.

Various copying functions are available. See the following page for the details: P.65 “COPYING FUNCTIONS”

P.79 “ADVANCED COPYING FUNCTIONS”

1 Check if paper is placed in the drawer.

For the acceptable types and sizes of paper, see the following pages: P.38 “Acceptable media types”

P.40 “Placing paper in drawers”

P.44 “Placing paper in the drawers of Paper Feed Pedestal (optional)”

2 Place the original.

For acceptable originals or how to place originals, see the following pages: P.52 “Acceptable originals”

P.56 “Placing originals on Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional)”

P.53 “Placing originals on the original glass”

P.54 “Placing booklet-type originals such as books or catalogs”

3 Key in the desired number of copies (= copy quantity) when you copy more than one set.

e.g.) 5 sets

READY		5
100%	NONSORT
ZOOM	FINISHING	EDIT

If you want to correct the copy quantity keyed in, press the [CLEAR/STOP] button, and then key in the correct number.

4 Select the copy modes as required.

P.65 “COPYING FUNCTIONS”

P.79 “ADVANCED COPYING FUNCTIONS”

Some functions may not be used together with other functions. For the details, see the following page.

P.213 “Copying Function Combination Matrix”

5 Press the [START] button.

Copying starts. The paper will exit with its copied side down.

Making Copies 57