Toshiba E-Studio167 manual Using Bypass Tray, Media type Paper size Maximum sheet Capacity *1

Using Bypass Tray

Place paper on the bypass tray when you use the following media types as copy paper:

yThick paper (21 lb. Bond to 90 lb. Index)

ySpecial media types such as tracing paper, sticker labels or overhead transparencies

yStandard size paper which cannot be placed in the drawers of the equipment and Paper Feed Unit (optional) (e.g. ST-R)

Using the bypass tray is recommended also for copying on standard-size paper other than those placed in the drawers. The following sizes are available for bypass copying:

Media type	Paper size	Maximum sheet
		capacity *1
Plain paper	LT format:	100 sheets (17 lb. Bond)
(17 - 20 lb. Bond)*2	LD, LG, LT, LT-R, ST-R, COMP, 13"LG	100 sheets (20 lb. Bond)
	A/B format:
THICK PAPER 1		1 sheet
	A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
(21 - 28 lb. Bond)*3		(21 - 28 lb. Bond)
THICK PAPER 2		1 sheet
(29 lb. Bond - 90 lb.		(29 lb. Bond - 90 lb. Index)
Index)*3
Tracing paper		1 sheet
(20 lb.)*3
Sticker labels*3		1 sheet
Transparencies*3, *4	LT only	1 sheet

*1 “Maximum sheet capacity” refers to the maximum number of sheets when TOSHIBA-recommended paper is used. See the following page for the TOSHIBA-recommended paper:

P.39 “Recommended paper”

*2 The paper of 13 to 16 lb. Bond can be used if it is set on the bypass tray one by one.

*3 Automatic duplex copying is not available.

*4 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.

Using Bypass Tray 61