Toshiba E-STUDIO207 Check the menu, Nonsize, Set the paper size, Set the paper type, Thick PAPER1

2 Check the menu.

If the paper size has already been registered, the following menu is displayed. In this case, proceed to step 5.

Ready for bypass		1
100%	SORT
ZOOM	FINISHING	EDIT

If the paper size has not been registered, the following menu is displayed. In this case, proceed to step 3.

Select paper size

COMP

13LG

NON_SIZE

3 Set the paper size.

Press the selecting button B or C to select the size of paper placed in the drawer. This

can also be done with the or button. Then press the [ENTER] button. e.g.) Setting LT size

Select paper size

LD

LG

LT

When the paper is other than standard sizes, select “NON_SIZE”.

4 Set the paper type.

Press the selecting button C to select paper type. This can also be done with the or

button. Then press the [ENTER] button. e.g.) Thick paper (21 to 28 lb. Bond)

PAPER TYPE

THICK PAPER1

THICK PAPER2

TRANSPARENCY

You can select the media type from the following four: THICK PAPER 1: Thick paper (21 to 28 lb. Bond)

THICK PAPER 2: Thick paper (29 lb. Bond to 90 lb. Index), sticker labels

TRANSPARENCY: Overhead transparencies

PLAIN: Plain paper (17 to 20 lb. Bond), tracing paper

If you select a different media type from the one you placed on the bypass tray, this could cause a paper jam or the quality of the copied image could be lowered.

Using Bypass Tray 63