Toshiba E-Studio167, e-Studio237, E-STUDIO207 manual When Change direction ORG appears

1 Place paper in the drawer.

2 Press the [COPY] button several times until the lamp of the desired paper size is lit.

e.g.) Selecting LT size

You can select the desired paper size with the [DRAWER] button in the same procedure.

3 Press the APS/AMS selecting button until the AMS lamp is lit. The reproduction ratio on the “copy mode” main screen will be changed to “AMS”.

4 Place the original.

5 Select the other copy modes as required, and then press the [START] button.

Copying is performed with the most suitable reproduction ratio for the specified paper size.

When “Change direction ORG” appears

The direction of the original placed is not correct. Press the [ENTER] button to exit the original. Then place it by rotating 90 degrees and resume copying.

Zooming In/Out Copy Image 73