Toshiba e-Studio237, E-Studio167 manual Copy mode main screen, Message area, Custom mode setting

“Copy mode” main screen

After the power of the equipment is turned ON and the warm-up is finished, the display below is shown on the LCD screen. This display is called the “copy mode” main screen.

12

3

READY						1
	100%			NONSORT
ZOOM			FINISHING		EDIT
		4

5

This “copy mode” main screen appears by default after turning the power ON. You can display the main screen for the Fax function or the scanning function instead of the “copy mode” main screen by changing the default setting.

P.125 “Walkup Screen Setting”

1.Message area

This area displays the current status of this equipment or error messages.

2.Copy quantity

3.Reproduction ratio

4.Selecting button display

This area displays operation corresponding to each selecting button. ZOOM: Use this to specify the reproduction ratio manually.

P.75 “Specifying reproduction ratio manually”

Custom mode: Use this to recall the copying function registered as a custom function. You can quickly recall functions frequently used by registering it on the custom mode.

P.153 “Menu Customize”

EDIT: This area displays the copy menu. Use this to recall the desired copying function. P.80 “Copy Menu”

5.Custom mode setting

This area displays the current setting of the function which has been registered as custom function.

Description of Each Component 35