34USING YOUR ANSWERING MACHINE

Answer machine settings

Set the answer mode

You can set the answering machine to answer and record message (ANSWER & RECORD) or to just answer a call and play an outgoing message, but not allow the caller to leave a message (ANSWER ONLY)

1.Press MENU/OK when in idle mode to enter the menu list.

2.Press MENU/OK to select >ANS. SYSTEM.

3.Press UP/DOWN to select >SETTINGS,

4.Press MENU/OK and UP/DOWN to select >ANSWER MODE.

5.Press MENU/OK and UP/DOWN to select ANSWER & RECORD ANSWER ONLY.

6.Press MENU/OK to confirm your selection.

Set the answer delay

You can select the answering machine to answer a call after a different number of rings(2,4,6,8 or Toll Saver).

1.Press MENU/OK when in idle mode to enter the menu list.

2.Press MENU/OK to select >ANS.SYSTEM.

3.Press UP/DOWN to select > SETTINGS.

4.Press MENU/OK and UP/DOWN to select >ANSWER DELAY.

5.Press MENU/OK and UP/DOWN to select 2,4,6,8 or TOLL

SAVER.

6.Press MENU/OK to save your choice.

NOTE

If Toll Saver setting is selected, the answering machine will pick up after two rings if there are new messages and after four rings if there are no new messages.

OGM settings

This is the message your callers hear on the answering machine. There are two pre-recorded outgoing messages, or you can record your own.

Record the outgoing message

1.Press MENU/OK when in idle mode to enter the menu list.

2.Press MENU/OK to select >ANS. SYSTEM.

3.Press UP/DOWN to select >SETTINGS, and then press MENU/ OK.

4.Press UP/DOWN to select >OGM SETTINGS.

5.Press MENU/OK to select RECORD.

6.Press MENU/OK and UP/DOWN to select ANSWER & RECORD or

ANSWER ONLY.

7.Press MENU/OK to start recording after a “beep” sound is heard.

8.Press MENU/OK to stop recording and save the message. The just saved message is played automatically.

9.Press TALK OFF/BACK at any time to stop playing.

Page 36
Image 36
Oricom BT9500 user manual Answer machine settings, Set the answer delay, OGM settings, Set the answer mode