Oricom BT9500 user manual Replace a paired device

Introducing Bluetooth 15

NOTE

If the connection between the paired device and the telephone base does not resume by manually connecting the device on the paired device list, you will need to unpair or de-register the device from the Bluetooth enabled mobile phone. Make sure the device is no longer on the paired list after deregistration; then follow the steps in section “Pairing a Bluetooth enabled mobile phone” or “Pairing a Bluetooth headset” as above to start the pairing procedures again.

Replace a paired device

If you want to pair and connect a new device when there are already two devices paired with the telephone base, press and hold the Bluetooth button (which you want to terminate the corresponding connection) on the telephone base until the corresponding Bluetooth LED is flashing, the connection via this Bluetooth button will be terminated automatically, then start with step two of section “Pairing a Bluetooth enabled mobile phone” or “Pairing a Bluetooth headset”. If you do not pair a new device within two minutes, the Bluetooth LED flashes on the telephone base will turn off and the system will return to idle mode.