Oricom BT9500 Register a handset, De-register a handset, Press UP/DOWN to select Register HS

REGISTRATION

IMPORTANT: When you purchase your phone all handsets are already registered to the base, so you do not need to register them. Handset registration is only necessary when you buy extra handsets or if a handset becomes faulty.

Your new telephone system can accommodate up to 6 handsets. You can add new handsets to your telephone system, but each device must be registered with the telephone base before use.

Register a handset

1.Press MENU/OK when in idle mode to enter the menu list.

2.Press UP/DOWN to select REGISTER HS.

3.Press MENU/OK and then enter the system PIN. (Default is

0000.)

4.Press MENU/OK, and the display will show PRESS AND HOLD

PAGE BUTTON.

5.Press and hold <PAGE> on the base for about 3 seconds until the IN USE LED flashes slowly. After a short time, the handset display will show REGISTERING, and then change to HANDSET X, where X denotes the handset number (1-5), if registration is successful.

REGISTRATION 31

NOTES

1.If the registration is not successful, the display will show NO BASE FOUND. Try the registration process again.

2.You cannot register a handset if any other system handset is in use.

De-register a handset

You may need to de-register a handset if you have five registered handsets and need to replace a unit.

Please read carefully through all the instructions on this page before beginning the de-registration process.

1.Press MENU/OK when in idle mode to enter the menu list.

2.Press UP/DOWN to select DE-REGISTER HS.

3.Press MENU/OK and then enter the system PIN. (Default is

0000.)

4.Press MENU/OK and then UP/DOWN to select the handset you wish to remove.

5.Press MENU/OK, and the display will show DE-REGISTER?

6.Press MENU/OK to confirm. Display will show DE-REGISTED if it is successful which means DE-REGISTERED.

NOTES

You can de-register the handset currently being used.