Toshiba 26LV47 manual Setting the PC Audio, Setting the sleep timer

Press Yand open the Audio menu. Highlight Audio Setup and press T.

Chapter 6: Using the TV’s features

Setting the PC Audio

This function allows you to output the sound from your PC (if connected) or mute the sound from your PC and output the sound from your HDMI (DVI) connection. (- page 20)

To set the PC Audio:

1

2

3 Press B or b to select PC Audio and then press C or c to select No or Yes.

Yes: Outputs the sound from your PC.

No: Mutes the sound from your PC, and outputs the sound from the HDMI-1 connection.

Audio Setup

PC Audio			No
HDMI 1 Audio			Auto
MTS			Stereo
Language			English
Optical Output Format		Dolby Digital/Surround
Dolby Digital			Compressed
Dynamic Range Control
DVD Audio			Stereo
	Reset		Done

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 4 on page 14 and “Setting the HDMI™ Audio mode” on page 35.)

Setting the sleep timer

You can set the sleep timer to turn off the TV after a set length of time (maximum of 180 minutes).

To set the sleep timer using the remote control:

Press [on the remote control to set the length of time until the TV turns off. Repeatedly press [to increase the time in 10-minute increments, or press B or b to increase or decrease the time in 10-minute increments, to a maximum of 180 minutes.

To set the sleep timer using the on-screen menus:

1 Press Yand open the Setup menu.

2 Highlight Sleep Timer and press T.

Setup

Installation

Sleep Timer

PC Settings

3 Press the Number buttons to enter the length of time in 10-minute increments.

Sleep Timer

Enter total minutes until the TV turns off automatically (Maximum

180minutes) 1 2 0

Cancel Done

4 Highlight Done and press T.

Note: When a power failure occurs, the sleep timer setting may be cleared.

To display the remaining sleep time:

Press [.

Sleep Timer

120 minutes

Note: A message will display on-screen when there is one minute remaining on the sleep timer.

To cancel the sleep timer:

Repeatedly press [until it is set to 0 minute.

55