KitchenAid compactor installation instructions Now start

Page 3

Now start...

With compactor in room where it will be installed.

Product/Floor Damage

. Do Not grasp console to move compactor.

. Before moving compactor across floor, check that compactor is on shipping base or slide compactor onto cardboard or hardboard.

shipping materials or other items shipped in the drawer. Do Not remove the compactor bag (if installed). Grasp the handle and raise the front of drawer untrl it clears stops. Grasp sides of drawer and lift drawer out of compactor. Place the drawer on the two corner posts.

6n Use pliers to lower leveling legs away from cabinet. Stand the cabinet upright

7n Place level inside on the

Failure to follow these instructions may result in damage to floor covering or product.

1. Remove compactor from shipping carton. Remove all protective packaging materials such as tape and shipping pads Waxy residue from protective shipping material may be

removed with .a:.mild...solution of:. liauid household cleaner and

water.

cord ....

clip

I

2. r!l

Check that power supply cord is attached to the cord clip on the rear of the compactor.

3 n Place two corner posts from carton on floor near compactor. Open compactor drawer and remove any

n Place the other two corner posts on the floor to the side of the compactor. Grasp the sides of the compactor cabinet and put compactor on its side on top of the corner posts. Remove the shipping base from the bottom of compactor.

n Freestandina installation

Go to Step 6. -

Undercounter installation

The rear wheels are preset for a cabinet opening height of 34” (86.4 cm> (Position “A”).

To adjust for other cabinet opening heights, loosen screw just enough to clear stud from hole in position “A”. Move the rear wheel and stud to position “B”or “C” as needed for your cabinet opening measurement:

Position B: 34” to 34-3/16” (86.4 to 86.8 cm)

Position C: 34-3/l 6” to 34- l/2” (86.8 to 87.6 cm)

Tighten screw. Repeat for other rear wheel.

floor of the cabinet. Check that the compactor is level from front to back and side to side. Adjust the leveling legs until the compactor is level.

8 n Freestanding installation Go to Step 9.

Undercounter installation Remove the plastic plugs from the compactor top. Determine if you want the compactor frame or drawer front flush with the cabinet front.

Install the retaining brackets to cabinet top to one position:

If the compactor frame is to be flush with the cabinet front, place retaining bracket screws through “A”,

If the compactor drawer front is to be flush with the cabinet front, place retaining bracket screws through “C”.

If the compactor is to be

midway between “A” and “C”, place retaining bracket screws through ‘B”.

Page 3

Image 3
Contents Before you Start Important Read and save these instructionsRecommended groundfng method Electrical reauirementsNow start Adjusting the toe plate Before you call For service Changing color panelCustom-made panels If you need Assistance

compactor specifications

The KitchenAid compactor is a highly efficient kitchen appliance designed to streamline waste management and maximize space in contemporary kitchens. Renowned for its robust construction and user-friendly features, the KitchenAid compactor stands out as an essential tool for households striving for organization and cleanliness.

One of the primary features of the KitchenAid compactor is its powerful compaction capability. With the ability to reduce waste volume by up to 80%, it significantly minimizes the need for frequent trash disposal. This efficiency not only saves space in your kitchen but also contributes to a more environmentally friendly household by reducing the frequency of garbage bags used.

Equipped with advanced technology, the KitchenAid compactor boasts a unique Silent Close feature, which ensures that the compactor lid closes gently and quietly, preventing any unpleasant noise in your kitchen. This feature is particularly appreciated in homes where maintaining a serene environment is a priority.

The KitchenAid compactor also comes with an easy-to-use foot pedal operation. This hands-free method allows users to open the compactor effortlessly, making it convenient to dispose of waste without the need to touch the unit, thus promoting better hygiene in the kitchen. Additionally, the compactor includes an automatic start feature, enabling it to operate efficiently after loading without manual intervention.

Another noteworthy characteristic of the KitchenAid compactor is its durable design. Made with high-quality materials, including a sturdy stainless steel body, it is built to withstand daily use while maintaining its sleek appearance. The compact design fits seamlessly into kitchen cabinetry, making it an ideal choice for those with limited space.

In terms of maintenance, the KitchenAid compactor is designed for easy cleaning. Its liners are removable and dishwasher safe, allowing for hassle-free upkeep. Furthermore, the compactor is equipped with a carbon filter to control odors, ensuring that any lingering smells are effectively neutralized.

In conclusion, the KitchenAid compactor combines functionality, durability, and convenience, making it a valuable addition to any modern kitchen. With its advanced features and thoughtful design, it enhances waste management practices while promoting a clean and organized living space. Whether you are an avid cook or simply looking to maintain kitchen order, the KitchenAid compactor provides the perfect solution.