KitchenAid compactor installation instructions Adjusting the toe plate

Page 4

Personal Injury Hazard When moving or lifting the compactor, use a glove to protect and cushion your hand.

Failure to do so could result in personal injury.

Floor Damage

Do not allow the rear frame of the compactor to touch the floor when lifting or rolling.

Doing so could damage floor covering.

0 ..

I w MOW.? tne compactor

close to its final position. Plug the power cord into a properly grounded receptacle.

Freestanding installation Carefully move it into its final position. Check that compactor is still level (See Step 7.) Go to Step 11,

Undercounter installation

Carefully lift the front slightly and roll it into the cabinet opening until the retaining brackets stop the unit.

'r

Countertop mounting

retaining

..‘.bracket

ounting rew

Cabinet front mounting

10.

Undercounter installation

Fasten the retaining brackets to the underside of the countertop with the mounting screws.

If brackets cannot be attached to the underside of countertop, attach mounting clips to brackets. Fasten compactor to cabinet front with mounting screws through mounting clips.

11. Grasp sides of compactor drawer and place bottom of drawer into tracks. Lift at the handle so the front of drawer will go over drawer stops Close drawer. Open drawer and check if drawer opens freely. If the toe plate rubs against floor, see “Adjusting the toe plate” for further instructions.

12. Read Use and Care Guide Operation Instructions to fully understand your new compactor. Keep all literature in a safe place for future reference

Adjusting the toe plate

If the toe plate rubs the floor covering, the toe plate clearance may be changed as follows:

1.Mark on each side of the toe plate the amount of toe plate that rubs the floor covering.

2.Remove the drawer from the unit (Refer to Step 3 of the Installation Instructions.)

3.Place drawer on a protective covering, cardboard, etc., so the front panel faces upward.

4.With a ruler and a pencil or chalk, draw a line between the marks on each side of toe plate.

5.Use scissors or utility knife to cut toe plate along line. (See Figure 2.)

6.Replace drawer as explarned in Step 11, If toe plate still rubs floor covering, repeat Steps l-6.

Figure 2

Page 4

Image 4
Contents Important Read and save these instructions Before you StartElectrical reauirements Recommended groundfng methodNow start Adjusting the toe plate Changing color panel Before you call For serviceCustom-made panels If you need Assistance

compactor specifications

The KitchenAid compactor is a highly efficient kitchen appliance designed to streamline waste management and maximize space in contemporary kitchens. Renowned for its robust construction and user-friendly features, the KitchenAid compactor stands out as an essential tool for households striving for organization and cleanliness.

One of the primary features of the KitchenAid compactor is its powerful compaction capability. With the ability to reduce waste volume by up to 80%, it significantly minimizes the need for frequent trash disposal. This efficiency not only saves space in your kitchen but also contributes to a more environmentally friendly household by reducing the frequency of garbage bags used.

Equipped with advanced technology, the KitchenAid compactor boasts a unique Silent Close feature, which ensures that the compactor lid closes gently and quietly, preventing any unpleasant noise in your kitchen. This feature is particularly appreciated in homes where maintaining a serene environment is a priority.

The KitchenAid compactor also comes with an easy-to-use foot pedal operation. This hands-free method allows users to open the compactor effortlessly, making it convenient to dispose of waste without the need to touch the unit, thus promoting better hygiene in the kitchen. Additionally, the compactor includes an automatic start feature, enabling it to operate efficiently after loading without manual intervention.

Another noteworthy characteristic of the KitchenAid compactor is its durable design. Made with high-quality materials, including a sturdy stainless steel body, it is built to withstand daily use while maintaining its sleek appearance. The compact design fits seamlessly into kitchen cabinetry, making it an ideal choice for those with limited space.

In terms of maintenance, the KitchenAid compactor is designed for easy cleaning. Its liners are removable and dishwasher safe, allowing for hassle-free upkeep. Furthermore, the compactor is equipped with a carbon filter to control odors, ensuring that any lingering smells are effectively neutralized.

In conclusion, the KitchenAid compactor combines functionality, durability, and convenience, making it a valuable addition to any modern kitchen. With its advanced features and thoughtful design, it enhances waste management practices while promoting a clean and organized living space. Whether you are an avid cook or simply looking to maintain kitchen order, the KitchenAid compactor provides the perfect solution.