Multiquip MVC-88GHW manual Compactor Safety

Page 8

SAFETY INFORMATION

COMPACTOR SAFETY

DANGER

„NEVER operate the equipment in an explosive atmosphere or near combustible materials.An explosion or fire could result causing severe bodily harm or even death.

WARNING

„NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.

CAUTION

„NEVER lubricate components or attempt service on a running machine.

NOTICE

„ALWAYS keep the machine in proper running condition.

„Fix damage to machine and replace any broken parts immediately.

„ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.

ENGINE SAFETY

DANGER

„The engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled.

„The engine of this equipment requires an adequate free flow of cooling air. NEVER operate this equipment in any enclosed or narrow

area where free flow of the air is restricted. If the air

flow is restricted it will cause injury to people and property and serious damage to the equipment or engine.

WARNING

„DO NOT place hands or fingers inside engine compartment when engine is running.

„NEVER operate the engine with heat shields or guards removed.

„ Keep fingers, hands hair and clothing away from all moving parts to prevent injury.

„DO NOT remove the radiator cap while the

engine is hot. High pressure boiling water will gush out of the radiator and severely scald any persons in the general area of the compactor.

„ DO NOT remove the coolant drain plug while the engine is hot. Hot coolant will gush out of the coolant tank and severely scald any persons in the general area of the compactor.

„DO NOT remove the engine oil drain plug while the engine is hot. Hot oil will gush out of the oil tank and severely scald any persons in the general area of the compactor.

CAUTION

„NEVER touch the hot exhaust manifold,

muffler or cylinder. Allow these parts to cool before servicing equipment.

NOTICE

„NEVER run engine without an air filter or with a dirty air filter. Severe engine damage may occur. Service air filter frequently to prevent engine malfunction.

„NEVER tamper with the factory settings of the engine or engine governor. Damage to the engine or equipment can result

if operating in speed ranges above the maximum allowable.

„NEVER tip the engine to extreme angles during lifting as it may cause oil to gravitate into the cylinder head, making the engine start difficult.

PAGE 8 — MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11)

Image 8
Contents Model MVC-88GH/GHW Proposition 65 Warning Page Table of Contents Component DrawingsParts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesGeneral Safety Compactor Safety Fuel Safety Transporting Safety Specifications Specifications CompactorGeneral Information Definition of Plate CompactorComponents Plate Compactor ControlsBasic Engine Initial ServicingInspection Before StartingClutch Pulley Vibrator Operation Thoroughly understoodNever stop the engine suddenly while working at high speeds Maintenance Inspection and Maintenance ServiceTablesEngine OIL Changing Vibrator OIL Long -TERM Storage Plate Compactor StorageTroubleshooting Engine TroubleshootingEngine Troubleshooting Page Explanation of Code in Remarks Column Xxxxx only Not Used onSuggested Spare Parts Name Plate and Decals Part Name Body Assy Earth Wire Vibrating PlateNUT M10 Washer SW M10Vibrator Assy Vibrating Case Packing 1/4WASHER, Lock M16 WASHER, Flat M16Sprinkler Assy Packing Cock PT1/4Sprinkling Pipe Pipe Holder LTransport Wheel Assy Wheel Shaft WASHER, Flat M20Split Cotter PIN RollerCylinder Head Assy GUIDE, Valve OS Optional CLIP, Valve GuideGASKET, Cylinder Head TUBE, BreatherCylinder Barrel Assy WEIGHT, Governor HOLDER, Governor WeightIncludes Items W Includes Items W/ #Crankcase Cover Assy GASKET, Case Cover GASKET, OIL Filler CAPCrankshaft Assy Crankshaft Q-TYPE PISTON/RINGS Assy BOLT, Connecting ROD Ring SET, Piston STDRing SET, Piston OS Piston STDCamshaft Assy SPRING, Weight Return ROD, PushARM, Vlave Rocker LIFTER, ValveRecoil Starter Assy SCREW, Setting REEL, Recoil StarterRATCHET, Starter GUIDE, RatchetFAN Cover Assy PLATE, Side OIL Alert CLIP, HarnessShroud Alert UNIT, OILCarburetor Assy PLATE, Lever Setting Gasket SETValve SET, Float Float SETAIR Cleaner Assy ELEMENT, AIR Cleaner Dual COVER, AIR Cleaner DualGROMMET, AIR Cleaner COLLAR, AIR CleanerMuffler Assy PROTECTOR, Muffler CAP, MufflerARRESTER, Spark GASKET, MufflerFuel Tank Assy RUBBER, Supporter 107MM JOINT, Fuel TankTANK, Fuel *NH1* Black GASKET, Fuel Filler CAPCooling FAN and Flywheel Assy FAN, Cooling PULLEY, StarterFlywheel Flywheel LampIgnition Coil Assy WIRE, Stop Switch 370MM Coil ASSY., IgnitionControl Assy HOLDER, Wire ARM, GovernorROD, Governor SPRING, GovernorNo Artwork Available Gasket KIT Assy06111ZH8405 Labels Assy MARK, OIL Alert E LABEL, CautionMARK, Choke Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

MVC-88GH, MVC-88GHW specifications

The Multiquip MVC-88GHW and MVC-88GH are robust and versatile gasoline-powered walk-behind vibratory plate compactors, designed to meet the demands of various construction and landscaping applications. These machines excel in compacting granular soils, crushed aggregate, and asphalt, making them ideal for both commercial and residential projects.

One of the standout features of the MVC-88GHW and MVC-88GH is their powerful 4-stroke Honda GX160 engine. This engine provides reliable performance and outstanding fuel efficiency, significantly reducing downtime and operating costs. With an output of 5.5 horsepower, it delivers ample power to ensure effective soil compaction, enabling users to achieve optimal results on any job site.

Both models boast a rugged, cast iron base plate that offers exceptional stability and durability during operation. The base plates are designed in varying widths, offering versatility to suit different project needs. The MVC-88GHW features a working width of 20 inches, while the MVC-88GH has a slightly narrower width, catering to more confined spaces.

In terms of technology, the MVC-88GHW and MVC-88GH utilize a well-engineered vibratory system that enhances compaction efficiency. The high-frequency vibration, generating up to 5,000 vibrations per minute, ensures deep penetration into the soil, providing maximum compaction in fewer passes. This efficiency not only speeds up the compaction process but also minimizes wear and tear on the machine over time.

Another important characteristic is the operator comfort and safety features included in these models. They are equipped with ergonomic, padded handlebars that reduce operator fatigue, enabling longer working hours without discomfort. Additionally, the machines feature a dead-man throttle for enhanced safety, allowing operators to quickly stop the engine in emergencies.

The MVC-88GHW and MVC-88GH are designed with portability in mind. They are equipped with a transport wheel, making it easy to move them from one job site to another. This feature, coupled with their lightweight design, enhances their usability for contractors and landscapers alike.

In summary, Multiquip's MVC-88GHW and MVC-88GH walk-behind vibratory compactors deliver a perfect blend of power, efficiency, and user convenience, making them essential tools for anyone looking to achieve high-quality compaction results in diverse applications.