Multiquip MVC-88GHW manual Fuel Safety

Page 9

SAFETY INFORMATION

FUEL SAFETY

DANGER

„DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity.

FUEL

FUEL

„DO NOT start the engine near spilled fuel or combustible fluids. Diesel fuel is extremely flammable and its vapors can cause an explosion if ignited.

„ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

„ALWAYS use extreme caution when working with flammable liquids.

„DO NOT fill the fuel tank while the engine is running or hot.

„DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system.

„Store fuel in appropriate containers, in well-ventilated areas and away from sparks and flames.

„NEVER use fuel as a cleaning agent.

„DO NOT smoke around or near the

equipment. Fire or explosion could result from fuel vapors or if fuel is spilled on a hot engine.

BATTERY SAFETY (ELECTRIC START ONLY)

DANGER

„DO NOT drop the battery. There is a possibility that the battery will explode.

„DO NOT expose the battery to open flames,

sparks, cigarettes, etc.The battery contains combustible gases and liquids. If these gases and liquids come into contact with a flame or spark, an explosion could occur.

WARNING

„ALWAYS wear safety glasses when handling the battery to avoid eye irritation. The battery contains acids that can cause injury to the eyes and skin.

„Use well-insulated gloves when picking up the battery.

„ALWAYS keep the battery charged. If the battery is not charged, combustible gas will build up.

„DO NOT charge battery if frozen. Battery can explode. When frozen, warm the battery to at least 61°F (16°C).

„ALWAYS recharge the battery in a well-ventilated environment to avoid the risk of a dangerous concentration of combustible gases.

„ If the battery liquid (dilute sulfuric acid) comes into contact with clothing or skin, rinse skin or clothing immediately with plenty of water.

„If the battery liquid (dilute sulfuric acid) comes into contact with eyes, rinse eyes immediately with plenty of water and contact the nearest doctor or hospital to seek medical attention.

CAUTION

„ALWAYS disconnect the NEGATIVE battery terminal before performing service on the equipment.

„ALWAYS keep battery cables in good working condition. Repair or replace all worn cables.

MVC88GH/GHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (01/11/11) — PAGE 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model MVC-88GH/GHW Proposition 65 Warning Page Component Drawings Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationGeneral Safety Compactor Safety Fuel Safety Transporting Safety Specifications Compactor SpecificationsDefinition of Plate Compactor General InformationPlate Compactor Controls ComponentsInitial Servicing Basic EngineBefore Starting InspectionClutch Pulley Vibrator Thoroughly understood OperationNever stop the engine suddenly while working at high speeds Inspection and Maintenance ServiceTables MaintenanceEngine OIL Changing Vibrator OIL Plate Compactor Storage Long -TERM StorageEngine Troubleshooting TroubleshootingEngine Troubleshooting Page Xxxxx only Not Used on Explanation of Code in Remarks ColumnSuggested Spare Parts Name Plate and Decals Part Name Body Assy Vibrating Plate Earth WireNUT M10 Washer SW M10Vibrator Assy Packing 1/4 Vibrating CaseWASHER, Lock M16 WASHER, Flat M16Sprinkler Assy Cock PT1/4 PackingSprinkling Pipe Pipe Holder LTransport Wheel Assy WASHER, Flat M20 Wheel ShaftSplit Cotter PIN RollerCylinder Head Assy CLIP, Valve Guide GUIDE, Valve OS OptionalGASKET, Cylinder Head TUBE, BreatherCylinder Barrel Assy HOLDER, Governor Weight WEIGHT, GovernorIncludes Items W Includes Items W/ #Crankcase Cover Assy GASKET, OIL Filler CAP GASKET, Case CoverCrankshaft Assy Crankshaft Q-TYPE PISTON/RINGS Assy Ring SET, Piston STD BOLT, Connecting RODRing SET, Piston OS Piston STDCamshaft Assy ROD, Push SPRING, Weight ReturnARM, Vlave Rocker LIFTER, ValveRecoil Starter Assy REEL, Recoil Starter SCREW, SettingRATCHET, Starter GUIDE, RatchetFAN Cover Assy CLIP, Harness PLATE, Side OIL AlertShroud Alert UNIT, OILCarburetor Assy Gasket SET PLATE, Lever SettingValve SET, Float Float SETAIR Cleaner Assy COVER, AIR Cleaner Dual ELEMENT, AIR Cleaner DualGROMMET, AIR Cleaner COLLAR, AIR CleanerMuffler Assy CAP, Muffler PROTECTOR, MufflerARRESTER, Spark GASKET, MufflerFuel Tank Assy JOINT, Fuel Tank RUBBER, Supporter 107MMTANK, Fuel *NH1* Black GASKET, Fuel Filler CAPCooling FAN and Flywheel Assy PULLEY, Starter FAN, CoolingFlywheel Flywheel LampIgnition Coil Assy Coil ASSY., Ignition WIRE, Stop Switch 370MMControl Assy ARM, Governor HOLDER, WireROD, Governor SPRING, GovernorGasket KIT Assy No Artwork Available06111ZH8405 Labels Assy LABEL, Caution MARK, ChokeMARK, OIL Alert E Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help

MVC-88GH, MVC-88GHW specifications

The Multiquip MVC-88GHW and MVC-88GH are robust and versatile gasoline-powered walk-behind vibratory plate compactors, designed to meet the demands of various construction and landscaping applications. These machines excel in compacting granular soils, crushed aggregate, and asphalt, making them ideal for both commercial and residential projects.

One of the standout features of the MVC-88GHW and MVC-88GH is their powerful 4-stroke Honda GX160 engine. This engine provides reliable performance and outstanding fuel efficiency, significantly reducing downtime and operating costs. With an output of 5.5 horsepower, it delivers ample power to ensure effective soil compaction, enabling users to achieve optimal results on any job site.

Both models boast a rugged, cast iron base plate that offers exceptional stability and durability during operation. The base plates are designed in varying widths, offering versatility to suit different project needs. The MVC-88GHW features a working width of 20 inches, while the MVC-88GH has a slightly narrower width, catering to more confined spaces.

In terms of technology, the MVC-88GHW and MVC-88GH utilize a well-engineered vibratory system that enhances compaction efficiency. The high-frequency vibration, generating up to 5,000 vibrations per minute, ensures deep penetration into the soil, providing maximum compaction in fewer passes. This efficiency not only speeds up the compaction process but also minimizes wear and tear on the machine over time.

Another important characteristic is the operator comfort and safety features included in these models. They are equipped with ergonomic, padded handlebars that reduce operator fatigue, enabling longer working hours without discomfort. Additionally, the machines feature a dead-man throttle for enhanced safety, allowing operators to quickly stop the engine in emergencies.

The MVC-88GHW and MVC-88GH are designed with portability in mind. They are equipped with a transport wheel, making it easy to move them from one job site to another. This feature, coupled with their lightweight design, enhances their usability for contractors and landscapers alike.

In summary, Multiquip's MVC-88GHW and MVC-88GH walk-behind vibratory compactors deliver a perfect blend of power, efficiency, and user convenience, making them essential tools for anyone looking to achieve high-quality compaction results in diverse applications.
Top Page Image Contents