MVC-88VGE/VGEW Maintenance | Multiquip manual

Multiquip manual MVC-88VGE/VGEW Maintenance

MVC-88VGE/VGEW — MAINTENANCE

TABLE 5. MACHINE INSPECTION

Item	Hours of Operation	Remarks

(Starting check)	Every 8 hours (every
(Starting check)	day)
	day)

Loosened or lost	Every 8 hours (every
screws	day)

Damage of any part	Every 8 hours (every
Damage of any part	day)
	day)

Function of controlling	Every 8 hours (every
system part	day)

Vibrator oil check	Every 100 hours	See page 19.

Vibrator oil	Every 200 hours	See page 19.
replacement	Every 200 hours	See page 19.
replacement

V-belt (clutch) check	Every 200 hour	See page 19.

Daily Service

■Check for leakage of fuel or oil.

■Check engine oil.

■Check for loose screws including tightness. See Table 6 below (tightening torque ), for retightening.

TABLE 6.

TIGHTENING TORQUE (in. kg/cm) Diameter

Material	6mm	8mm	10mm	12mm	14mm	16mm	18mm	20mm

4T	70	150	300	500	750	1,100	1,400	2,000

6-8T	100	250	500	800	1,300	2,000	2,700	3,800

11T	150	400	800	1,200	2,000	2,900	4,200	5,600

*100 (6mm) 300 ~ 350 (8mm) 650 ~ 700 (10mm)

*(In case counter-part is of aluminum)

(Threads in use with this machine are all right handed)

Material and quality of material is marked on each bolt, and screw.

ENGINE OIL

1.Drain the engine oil when the oil is warm as shown in Figure 14.

2.Remove the dipstick and then unscrew the oil plug and allow the oil to drain into a suitable container.

3.Replace engine oil with recommended type oil as listed in Table 3. For engine oil capacity, see Table 2 (engine specifications). DO NOT overfill.

4.Install drain bolt with sealing washer and tighten se- curely.

Figure 14. Engine Oil (Draining)

ENGINEAIRCLEANER

1.Remove the air cleaner cover and foam filter element as shown in Figure 15.

2.Tap the paper filter element (Figure 15) several times on a hard surface to remove dirt, or blow compressed air [not exceeding 30 psi (207 kPa, 2.1 kgf/cm2) through the filter elementfromtheaircleanercaseside.NEVER brushoffdirt. Brushingwillforcedirtintothefibers.Replacethepaperfilter element if it is excessively dirty.

3.Cleanfoamelementinwarm,soapywaterornonflammable solvent. Rinse and dry thoroughly. Dip the element in clean engineoilandcompletelysqueezeouttheexcessoilfromthe element before installing.

PAGE 20 — MVC-88VGE/VGEW PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #1 (01/11/11)

MVC-88VGE/VGEW specifications

The Multiquip MVC-88VGE/VGEW is a powerful and versatile compactor designed to deliver optimal performance for a variety of construction and landscaping tasks. Renowned for its robust design and advanced technologies, this equipment is well-suited for compacting asphalt, soil, and granular materials, making it a popular choice among contractors and construction professionals.

One of the standout features of the MVC-88VGE/VGEW is its exceptional compaction efficiency. It is equipped with a heavy-duty plate that provides a large compaction area, allowing operators to complete projects more quickly and effectively. The unit's centrifugal force and frequency settings can be easily adjusted, enabling precise tuning to suit different material types and site conditions. This adaptability ensures maximum compaction performance and minimizes the risk of damage to underlying materials.

The MVC-88VGE/VGEW is powered by a reliable engine, known for its durability and longevity. The engine's design incorporates advanced technologies that promote fuel efficiency and reduce emissions, thereby adhering to environmental regulations. Users benefit from an increased runtime with less frequent refueling, making it an economical choice for long-term projects.

Additionally, this model is fitted with an ergonomic handle that offers multiple operating positions. This design minimizes operator fatigue and enhances maneuverability on tight job sites. The handle also features vibration-dampening technology, significantly reducing the amount of vibration transferred to the operator during use. Such considerations ensure that operators are comfortable and productive throughout the workday.

Safety is also a primary focus in the design of the MVC-88VGE/VGEW. The unit is outfitted with a protective cover to shield the engine and key components from debris and environmental factors, extending its lifespan and reducing maintenance needs. Furthermore, the compact and lightweight construction makes it easy to transport and store, contributing to a more efficient workflow.

In summary, the Multiquip MVC-88VGE/VGEW combines power, efficiency, and user-friendly features, making it an indispensable tool for any construction or landscaping project. Its advanced technology, robust construction, and emphasis on operator comfort and safety set this compactor apart, ensuring it meets the demands of modern construction practices while enhancing productivity and results.