Multiquip manual MVC-88VGE/VGEW Plate Compactor Components Engine, Engine Components

Page 14

MVC-88VGE/VGEW PLATE COMPACTOR — COMPONENTS ( ENGINE)

1

10

9

 

 

2

8

 

 

7

 

3

6

 

 

 

 

5

4

Figure 2. Engine Controls & Components

ENGINE COMPONENTS

The engine (Figure 2) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing.

5.

Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop

 

the flow of fuel.

6.

Choke Lever – Used in the starting of a cold engine, or in

 

cold weather conditions. The choke enriches the fuel

 

mixture.

1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

DANGER Explosive

Fuel Hazard

Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT attempt to start the engine until the fuel residue

has been completely wiped up, and the area surrounding the engine is dry.

2.

Throttle Lever – Used to adjust engine RPM speed (lever

 

advanced forward - SLOW, lever back toward operator -

 

FAST).

3.

Recoil Starter (pull rope) – Manual-starting method. Pull

 

the starter grip until resistance is felt, then pull briskly and

 

smoothly.

4.

Starter Grip– Pull the starter grip until resistance is felt,

 

then pull briskly and smoothly to start engine.

7. Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

Operating the engine without an air

filter, with a damaged air filter, or a filter

NOTE in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

 

WARNING

Burn Hazard

 

 

 

Enginecomponentscangenerateextremeheat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER operate the engine with the muffler removed.

8. Spark Plug – Provides spark to the ignition system. Set spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch) Clean spark plug once a week.

9. Muffler – Used to reduce noise and emissions.

10. Fuel Tank – Holds approximately 1 gallon (3.6 liters) of unleaded gasoline. For additional information refer to engine owner's manual.

PAGE 14 — MVC-88VGE/VGEW PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #1 (01/11/11)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model MVC-88VGE/VGEW MVC-88VGE/VGEW Plate Compactor Proposition 65WARNING Page MVC-88VGE/VGEW Plate Compactor -TABLE of Contents Component DrawingsParts Ordering Procedure Ordering parts has never been easierMVC-88VGE/VGEWPLATECOMPACTOR-SAFETYINFORMATION General Safety MVC-88VGE/VGEWPLATECOMPACTOR-SAFETYINFORMATION Compactor SafetyMVC-88VGE/VGEWPLATECOMPACTOR-SAFETYINFORMATION MVC-88VGE/VGEWPLATECOMPACTOR- Safetyinformation Transporting SafetyMVC-88VGE/VGEWPLATECOMPACTOR- Specifications Specifications CompactorMVC-88VGE/VGEWPLATECOMPACTOR- General Information Definition of Plate CompactorMVC-88VGE/VGEWPLATECOMPACTOR-COMPONENTSCOMPACTOR MVC-88VGE/VGEW Plate Compactor Components Engine Engine ComponentsMVC-88VGE/VGEW Plate Compactor Inspection Before StartingMVC-88VGE/VGEW- Inspection Belt CheckNnnn MVC-88VGE/VGEW- Initial START-UP/OPERATION MVC-88VGE/VGEW- Maintenance MVC-88VGE/VGEW Maintenance Changing Vibrator OIL MVC-88VGE/VGEW- Preparation for Long -TERM Storage MVC-88VGE/VGEW-TROUBLESHOOTING Engine Engine TroubleshootingMVC-88VGE/VGEW-TROUBLESHOOTING ENGINE/COMPACTOR Engine TroubleshootingPage MVC-88VGE/VGEW- Explanation of Codes in Remarks Column QTY. ColumnMVC-88VGE/VGEW Suggested Spare Parts To 5 UnitsMVC-88VGE/VGEW- Name Plate and Decals MVC-88VGE/VGEW- Name Plate and Decals RemarksMVC-88VGE/VGEW- Body Assy Body Assy MVC-88VGE/VGEW-VIBRATOR Assy Vibrating Case MVC-88VGE/VGEW- Sprinkler ASSY. Option Sprinkler ASSY. OptionMVC-88VGE/VGEW- Sprinkler ASSY. Option Part Name QTY RemarksMVC-88VGE/VGEW-TRANSPORTWHEEL ASSY. Option Part Name QTY Robin EX170D54011 Engine AIR Cleaner Assy 220 260 570Base CP Cleaner Robin EX170D54011 Engine Camshaft Assy Camshaft Assy EX-170D40050 Carburetor Assy Carburetor AssyEX-170D40050 Carburetor Assy Robin EX170D54011 Engine Crankcase Assy Robin EX170D54011 Engine Crankcase Assy 960 2779900107EX-170D40050 CRANKSHAFT/PISTON Assy Crankshaft EX-170D40050 Cylinder Head Assy Valve Guide EX-170D40050 Fuel Tank Assy EX-170D40050 Fuel Tank Assy EX-170D40050 Governor Assy GOVERNOR, Lever EX-170D40050 Ignition COIL/FLYWHEEL Assy Flywheel EX-170D40050 Muffler Assy Muffler EX-170D40050 Recoil Starter Assy BLOWER, Housing CP EX-170D40050 -TOOL KIT Assy EX-170D40050 Tool KIT Assy Terms and Conditions of Sale Parts Page HERE’S HOW to GET Help

MVC-88VGE/VGEW specifications

The Multiquip MVC-88VGE/VGEW is a powerful and versatile compactor designed to deliver optimal performance for a variety of construction and landscaping tasks. Renowned for its robust design and advanced technologies, this equipment is well-suited for compacting asphalt, soil, and granular materials, making it a popular choice among contractors and construction professionals.

One of the standout features of the MVC-88VGE/VGEW is its exceptional compaction efficiency. It is equipped with a heavy-duty plate that provides a large compaction area, allowing operators to complete projects more quickly and effectively. The unit's centrifugal force and frequency settings can be easily adjusted, enabling precise tuning to suit different material types and site conditions. This adaptability ensures maximum compaction performance and minimizes the risk of damage to underlying materials.

The MVC-88VGE/VGEW is powered by a reliable engine, known for its durability and longevity. The engine's design incorporates advanced technologies that promote fuel efficiency and reduce emissions, thereby adhering to environmental regulations. Users benefit from an increased runtime with less frequent refueling, making it an economical choice for long-term projects.

Additionally, this model is fitted with an ergonomic handle that offers multiple operating positions. This design minimizes operator fatigue and enhances maneuverability on tight job sites. The handle also features vibration-dampening technology, significantly reducing the amount of vibration transferred to the operator during use. Such considerations ensure that operators are comfortable and productive throughout the workday.

Safety is also a primary focus in the design of the MVC-88VGE/VGEW. The unit is outfitted with a protective cover to shield the engine and key components from debris and environmental factors, extending its lifespan and reducing maintenance needs. Furthermore, the compact and lightweight construction makes it easy to transport and store, contributing to a more efficient workflow.

In summary, the Multiquip MVC-88VGE/VGEW combines power, efficiency, and user-friendly features, making it an indispensable tool for any construction or landscaping project. Its advanced technology, robust construction, and emphasis on operator comfort and safety set this compactor apart, ensuring it meets the demands of modern construction practices while enhancing productivity and results.
Top Page Image Contents