Machine Maintenance

1.At the end of each day’s operation, wipe off any dust from the transmitter and the receiver on the body of the machine.

2.At the end of each day’s operation, charge the transmitter battery if necessary.

Refer to Table 4 in the Troubleshooting section for periodic inspection and maintenance necessary for the machine.

MACHINE BATTERY MAINTENANCE

1.If a battery has not been used for some time, reduce the charge level initially to protect each plate inside the battery.

2.Check the battery terminals periodically to ensure that they are in good condition.

3.Use wire brush or sand paper to clean the battery terminals.

4.If the machine will not be in operation for a long period of time, charge the battery sufficiently, tighten all caps, correctly, store in cool dry place and check the battery charge level every month to maintain the performance of the battery.

BATTERY CABLE CONNECTION

1.When removing cable, disconnect the ground side (normally negative) first (Figure 16).

2.When installing cable connect the ground side (normally negative) last .

MACHINE BATTERY MAINTENANCE

MVH-702DRSC — MAINTENANCE

DANGER :

Lead-acid battery contains sulfuric acid, which may damage eyes or skin on contact.

Always wear a face shield to avoid acid getting into the eyes. If acid gets in contact with eyes,

flush immediately with clean water and get medical advice.

Wear rubber gloves and protective clothes to keep acid off skin. If acid gets in contact with skin, wash off immediately with clean water.

Use a flashlight to check battery electrolyte level. Always check the engine is stopped.

Do not charge battery or jump-start engine when the battery is frozen. Warm the battery to 15 degrees F or battery may explode.

Replace the battery with the same or similar capacity battery or battery may explode.

Do not close the exhaust outlet of battery. The gas pressure building up in the battery may cause explosion.

Before using a battery charger, read and understand the charger instruction manual thoroughly.

Charge the battery in a non-spark, well-ventilated area. Avoid fire from cigarette sparks or matches.

CAUTION :

1.If a battery has not been used for some time, reduce the charge level initially to protect each plate inside the battery.

2.Check the battery terminals periodically to ensure that they are in good condition.

3.Use wire brush or sand paper to clean the battery terminals.

Wear safety glasses or face mask , protective clothes, and rubber gloves when working with battery.

Positive	Negative
Terminal	Terminal

Figure 16. Battery Location

MQ-MIKASA MVH-702DRSC COMPACTOR — PARTS & OPERATION MANUAL — REV. #1 (12/17/03) — PAGE 25

MVH-702DRSC specifications

The Multiquip MVH-702DRSC is a state-of-the-art, reversible plate compactor that has been designed for maximum performance and efficiency in soil and asphalt compaction. Renowned for its durability and user-friendly features, the MVH-702DRSC is an ideal choice for a wide variety of construction and landscaping applications.

One of the standout features of the MVH-702DRSC is its powerful 4.5 hp engine, ensuring optimal performance in tough working conditions. The engine is not only reliable, but it also provides excellent fuel efficiency, allowing for extended operation without the need for frequent refueling. The compact design of the MVH-702DRSC enables it to easily navigate tighter job sites, making it an exceptional choice for residential and commercial projects alike.

Another remarkable characteristic of this plate compactor is its advanced vibration technology. With a maximum centrifugal force of 3,300 pounds, the MVH-702DRSC ensures efficient compaction of granular and cohesive soils. It features a wide base plate that is specifically designed to provide a high degree of stability and effective material displacement, which results in a well-compacted surface. The ability to reverse also allows operators to perform tasks quickly and effectively, eliminating the need to reposition the machine for optimal operation.

User comfort and control are prioritized in the design of the MVH-702DRSC. The ergonomic handle is adjustable and designed to reduce operator fatigue, allowing for extended periods of use without discomfort. The machine also incorporates a sophisticated splash guard, which helps to keep the engine and components clean, an important aspect that contributes to longevity and performance.

Moreover, the MVH-702DRSC is equipped with a protective frame that safeguards critical components during operation, minimizing maintenance requirements over time. The compact and robust design assures ease of transport, as it can fit in small trailers or truck beds, enabling contractors to easily move it between job sites.

In conclusion, the Multiquip MVH-702DRSC is a high-performing, versatile reversible plate compactor that combines power, efficiency, and user-friendly features. From its durable construction to its advanced vibration technology, it is designed to meet the rigorous demands of the construction industry while ensuring comfort and ease of use for operators. Ideal for compacting soil and asphalt, the MVH-702DRSC is a reliable choice for professionals seeking a robust compaction solution.