O T H E R C O N V E N I E N T F E A T U R E S
CHILD LOCK
The Child Lock prevents unwanted oven operation such as by small children.
The oven can be set so that the control panel is deactivated or locked. To set, touch TIMER/CLOCK pad, the number 1 and then touch the START pad and hold for three seconds. Should a pad be touched,
LOCK will appear in the display.
To cancel, touch TIMER/CLOCK, the number 1 and STOP/CLEAR pads.
DEMONSTRATION MODE
To demonstrate, touch TIMER/CLOCK, the number 0 and then touch the START pad and hold for three seconds. DEMO will appear in the display. Cooking operations and specific special features can now be demonstrated with no power in the oven. For example, touch START pad and the display will show 1:00 and count down quickly to End .
To cancel, touch TIMER/CLOCK, the number 0 and STOP/CLEAR pads. If easier, unplug the oven from the electrical outlet and replug.
C L E A N I N G A N D C A R E
Disconnect the power cord before cleaning. If possible, leave the door open to inactivate the oven during cleaning.
Exterior
The outside surface is painted. Clean the outside with mild soap and water; rinse and dry with a soft cloth. Do not use any type of household or abrasive cleaner.
Door
Wipe the window on both sides with a damp cloth to remove any spills or spatters. Metal parts will be easier to maintain if wiped frequently with a damp cloth. Avoid the use of spray and other harsh cleaners as they may stain, streak or dull the door surface.
Touch Control Panel
Care should be taken in cleaning the touch control panel. If the control panel becomes soiled, open the oven door before cleaning. Wipe the panel with a cloth dampened slightly with water only. Dry with a soft cloth. Do not scrub or use any sort of chemical cleaners. Close door and touch STOP/CLEAR.
Interior
Cleaning is easy because little heat is generated to the interior surfaces; therefore, there is no baking and setting of spills or spattering. To clean the interior surfaces, wipe with a soft cloth and warm water. DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For heavier soil, use baking soda or a mild soap; rinse thoroughly with hot water. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART OF THE OVEN.
Waveguide Cover
The waveguide cover is made from mica so requires special care. Keep the waveguide cover clean to as- sure good oven performance. Carefully wipe with a damp cloth any food spatters from the surface of the cover immediately after they occur.
Odor Removal
Occasionally, a cooking odor may remain in the oven. To remove, combine 1 cup water, grated peel and juice of 1 lemon and several whole cloves in a
Turntable/Turntable Support
The turntable and turntable support can be removed for easy cleaning. Wash them in mild, sudsy water; for stubborn stains use a mild cleanser and scouring sponge as described above. They are also dishwasher- proof. Use upper rack of dishwasher. The turntable motor shaft is not sealed, so excess water or spills should be wiped up immediately.
Turntable
Exterior | Interior | Turntable Support |
17