Sharp R-231F operation manual Before Operating, Getting Started, Clock Setting, Stop/Clear

BEFORE OPERATING

Getting Started

Step	Procedure	Pad Order			Display
	Ensure the oven door is closed.
1	Plug the oven into a power point and switch
	on the power.
				Flashing	eights
	Press the STOP/CLEAR pad so that the
			STOP
2	oven beeps.		CLEAR
				Only the dots will remain.

Clock Setting

* To enter the present time of day 11:34 (AM or PM).

Step	Procedure	Pad Order		Display
	Press the TIMER/CLOCK pad.
		TIMER
1		CLOCK
			The dots (:) will flash on and
			off.
2	Enter the correct time of day by pressing
	the numbers in sequence.
	Press the TIMER/CLOCK pad again.
3		TIMER
		CLOCK
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45),					will appear in
the display.
Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).

The clock of the oven works based on the frequency of power source. So it may gain or lose in some area where the frequency varies. It is recommended that you should adjust the time occasionally.

If you wish to know the time of day during the cooking or timer mode, press the CLOCK pad. As long as your finger is pressing the CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:

1.Stop the oven temporarily during cooking.

2.Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.

E-7