RR-939 Remote Control

SURROUND SOUND RECEIVER RSX-965

The RSX-965 includes a handheld remote control that does far more than operate the RSX-965. The RR-939 is a full-function pro- grammable remote control that can operate up to 8 audio/video components.

A separate manual, included with the remote, gives detailed infor- mation on programming and using the RR-939 to replace all of the remote controls in your system. This section is intended to provide only that information which pertains to the use of the RR-939 to operate the RSX-965.

Note: Many functions duplicate the RSX-965 front panel controls and are listed here only for your reference. Please refer to the previous Front Panel Controls section of this manual if you need additional information.

To operate the RSX-965 with the remote, make sure that the AU- DIO mode is active by pressing the AUD button on the remote be- fore you start. If it is active, pressing command keys on the RR-939 will cause the AUDIO button to flash red. Once the AUDIO mode is active, it will stay active unless you press one of the other DEVICE buttons to control a different component.

Programming the RR-939

The RR-939 is preprogrammed from the factory to operate the RSX-965. Should the AUDIO command set on your RR-939 not op- erate the RSX-965, it’s possible that the programming had been inadvertantly changed. To reprogram the remote to operate the RSX-965:

1.Press the AUDIO button at the top of the remote while simulta- neously pressing the MUTE button and hold both for at least one second. The AUDIO button will light in red for 20 seconds, indicat- ing that you have entered the program mode. The next step must be done within this 20 second period, or the RR-939 will revert to its standard operating mode.

2.Use the NUMERIC buttons to enter the 3-digit code (001) for the RSX-965 – press 0, then 0, then 1. The AUDIO button will flash each time you enter a digit.

3.Store the code number by pressing the corresponding AUDIO button again. The button will blink twice to confirm the storage of the code in memory.

VOLUME Buttons 44

A pair of buttons which duplicate the function of the front panel volume control. Press VOLUME UP to increase the volume and press VOLUME DOWN to decrease the volume.

TUNING Button 45

A pair of buttons used to change the station frequency up or down and duplicating the front panel TUNING button.

To tune manually, press the button quickly and release to in- crease or decrease the station frequency to the next available setting, whether or not there is a station broadcasting on that fre- quency. Use a succession of quick button presses to reach the desired station.

To tune automatically, press and hold the TUNING button for ap- proximately one second. The tuner will begin automatically scan- ning up or down until the next available station is detected. Weak stations will be skipped during auto tuning.

INPUT SOURCE Buttons 51

Two rows of buttons which duplicate the function of the eight IN- PUT SOURCE buttons on the RSX-965 front panel. Select any input source by pressing the appropriate button.

5.1 Button 55

Duplicates the 5.1 CH button on the front panel. Selects the 5.1 Channel input, overriding any other source selection.

BAND Button 48

Duplicates the AM/FM button on the front panel. Toggles between AM and FM modes.

NUMERIC Buttons 50

Ten numeric buttons, labeled 0 through 9, duplicate the function of the NUMERIC keypad on the front panel. Selects memorized sta- tion presets.

MUTE Button (remote only) 47

Push this button once to reduce all output levels to 0 – in other words, to turn the sound off. A flashing mute indication will ap- pear in the front panel and on screen displays. Press the MUTE button again to restore previous volume levels.

POWER Button 46

MENU button (remote only) 52

Duplicates the function of the STANDBY switch on the front panel. Press to activate the RSX-965. Press again to deactivate. The main POWER button on the front panel must be in the ON position for the remote standby function to operate.

Duplicates the function of the front panel MENU button. Push this button to turn on the on-screen menu system. If the menu system is already visible, push this button to cancel the Display.

Note: The RSX-965 On-Screen Display will automatically be turned off following 20 seconds without any control activity.