Polarize Plug & Short Cord Safety | Maximatic EFD-1010 specs

POLARIZE PLUG & SHORT CORD SAFETY..

Polarized Plug:

This appliance is for Household Use Only. Place it on a level surface, and insert plug into any 120-volt AC electrical outlet. Do not use any other type of outlet.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug fits in a polarized outlet only one way. If the plug does not fit into the outlet, reverse the plug and try again. Do not force the plug into the socket. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Short Cord:

A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.

If a longer detachable power-supply cord or extension cord is used, 1) the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and 2) the longer cord should be arranged so that it will not drape over the counter top or table where it can be pulled on by children or tripped over accidentally.

FIRST USE & OPERATION..

BEFORE USING:

1)Carefully unpack the food dehydrator.

2)Wash the five dehydrator trays and lid in warm, soapy water. Rinse well and dry thoroughly.

3)Wipe the dehydrator base with a clean, soft cloth or sponge. NEVER IMMERSE BASE, CORD OR PLUG IN WATER OR ANY OTHER LIQUID.

HOW TO USE:

1)Make sure unit is switched OFF and unplugged before using.

2)Always wash the dehydrator trays and lid before each use to avoid any food contamination.

3)Place base on a flat, smooth countertop surface where it will not fall or be pulled by the plug.

4)Prepare food to be dehydrated as instructed in this manual; preparation depends on the type of food. Do not overlap food or overload trays.

5)Arrange food on trays, but do not place trays on the base; stack up the trays first and set them aside.

6)Trays may be adjusted to accommodate a variety of food sizes.

7)Plug unit into electrical wall outlet, switch to ON and preheat for approximately 5 minutes.

8)Place stacked trays onto the base, cover the top tray with the lid, and allow food to dry for the recommended length of time; drying time may vary depending on the type of food.

9)Begin to check on food before the dehydration period is completed; check food for desired dryness. Remove individual pieces and store in containers or food bags. If some pieces are not yet done, leave them on the dehydrator and check frequently until all food dehydration is completed.

10)Food that is not going to be eaten within a day or two should be store in the refrigerator. If store food in the freezer, be sure to use containers or bags designed for freezer storage.

11)Switch the unit OFF and plug after using.

12)Always wash the dehydrator trays and lid after each use. Wipe the base with a soft damp cloth or sponge; do not allow water or any other liquid to get into the base. Make sure the trays and lid are completely dry before replacing them on the base.

SELECTING THE TYPE OF FOOD TO DEHYDRATE:

Food to be dried should be in good condition. Select fruits that are just ripe; they have the highest natural form of sugar and are best for drying. Fruits that are not ripe may have a flat, bitter taste. Vegetables should be fresh and tender. Check fruits and vegetables for marks or bruises and cut away these portions before preparing for dehydration. Avoid using overripe fruits and vegetables with spoiled portions. Meat, poultry and fish should be fresh and lean. Preparation, dehydration time and storage of foods also influence their quality and taste. Follow the preparation, dehydration and storage instructions in this manual to ensure the best-quality dried foods. WARNING: If you suspect food is contaminated, freeze at 0° for 48 hours to prevent bacteria growth, or heat at 175°F for 15 minutes to pasteurize it. Some nutrition may be lost, but it will stop the contamination process.

** ROLL-UP SHEET

The roll-up sheet is for use to dehydrate food that may have drippings that may drip through the holes on the trays.

However, it is primarily used to make FRUIT ROLL UPS. Simply mix a mixture of fruits until the consistency is thick and smooth. Pour the mixture over the roll-up sheet to dehydrate for approximately 12 hours.

EFD-1010 specifications

The Maximatic EFD-1010 is a cutting-edge device that has garnered considerable attention in the realm of precision dispensing technology. Designed for various industries, including electronics, automotive, and medical applications, the EFD-1010 stands out for its versatility and reliability.

One of the main features of the Maximatic EFD-1010 is its advanced microprocessor control, which allows for precise and consistent dispensing of fluids. This feature is essential for tasks that require high accuracy, such as circuit board assembly and intricate adhesive applications. The device can handle a wide range of materials, including low and high viscosity adhesives, sealants, and other fluids, making it a valuable tool for any production line.

Another significant characteristic of the EFD-1010 is its user-friendly interface. The device is equipped with a clear digital display that provides real-time information and allows operators to easily adjust dispensing parameters such as time, speed, and pressure. This interface minimizes the learning curve for new users and ensures that experienced operators can quickly optimize the device for varying applications.

In terms of technology, the EFD-1010 employs a state-of-the-art positive displacement pump system. This system ensures that each dispense is uniform and repeatable, which is crucial for quality assurance in manufacturing processes. Additionally, the system is designed to minimize waste, allowing for more economical use of dispensing materials.

The EFD-1010 also features a compact design, which makes it easy to integrate into existing production setups without requiring extensive modifications. Its portability allows manufacturers to deploy the device across multiple workstations as needed, enhancing workflow efficiency.

Moreover, the device incorporates safety features that protect operators during use. Automatic shutoff mechanisms and protective enclosures work together to reduce the risk of accidents, making it a safe choice for high-paced production environments.

In summary, the Maximatic EFD-1010 is an innovative and versatile dispensing solution that combines advanced technology, user-friendly operation, and safety features. Its ability to handle various materials with precision makes it a crucial asset for any manufacturer aiming to enhance productivity and quality in their production lines. With the EFD-1010, companies can confidently meet the demands of modern manufacturing while ensuring consistent results and minimizing waste.