Maximatic EFD-1010 instruction manual Meat Drying Preperation, Other Dryable Items, Helpful Hints

Page 6

MEAT DRYING PREPERATION..

Normally raw meat is used for making jerky. However, cooked meat as well as raw meat can be dehydrated.

Make sure to always cut meat down to bite size before dehydration. It is much easier to work with beforehand.

Be extra careful when making jerky from raw chicken or turkey because salmonella bacteria may be present in poultry when it is purchased. It is extremely important to cut raw chicken or turkey into portions that do not exceed 1/4" thickness. Any marinade must thoroughly penetrate and soak into the meat, up to 10 minutes or more.

It is not recommended to remove any excess marinade sauce. Never consume food that tastes, smells or looks improper.

RAW MEAT FOR BEEF JERKY: Any kind of beef is good for making beef jerky. Make sure to trim off all the fat before slicing into bite-size portions. It is recommended to slice meat about 1/8" - 1/4" thickness.

Marinating beef has many different combination recipes. Please see some recipe samples below for your preference:

TRADITIONAL JERKY: (Good for approximately 3-5 lbs of beef, fish, or poultry)

½lb brown sugar 3 cups soy sauce *Spices of your choosing

½cup liquid smoke (optional)

Mix all ingredients together. Make sure the brown sugar is dissolved. Let mixture sit for approximately 15 minutes. Place cut up meat into the marinade and cover. Let stand for 10 minutes refrigerated. Make sure to turn meats periodically to coat thoroughly. Drain any excess liquid.

Place meats onto trays and dehydrate. Drying time for a full 5 -tray set up will take approximately 24-36 hours.

OTHER DRYABLE ITEMS..

NUTS:

Remove shells to the nuts and rinse nuts with warm water. Pat dry and spread on trays. Most nuts will take approximately 20-30 hours to dehydrate; they should be allowed to dehydrate until brittle.

After dehydrating, allow to cool. Nuts that will not be consumed within a day or two should be frozen to ensure freshness. Remove nuts from the freezer and allow them to defrost before using.

HERBS :

Rinse and pat dry. Remove any dead, mushy or discolored portions, but leave the stem and do not break apart until drying. Spread herbs or flowers on tray and allow to dehydrate for about 2-7 hours, depending on their type. When drying is complete, remove from tray and allow to cool.

Remove from stem and break leaves or buds apart, or crush if desired. If dehydrating seeds, choose when pods have changed in color.

FLOWERS:

For best results, pick flowers after the morning dew rises and before the evening mist sets in. Do not use flowers that have been sprayed with insecticides or other harmful chemicals. If dehydrating at the same time as herbs intended for consumption, place flowers on the bottom trays and herbs on the top trays; this is to prevent any “drippings” from the flowers to fall onto the herbs.

HELPFUL HINTS..

-Always preheat the dehydrator for at least 5 minutes before using.

-If the dehydrator has been stored away for some time, wash and clean before using.

-Fresh vegetables and fruits are best for dehydrating. Canned goods to not dehydrate as well.

-Vegetables and fruits should always be cleaned before preparation and pretreatment.

-For best results, always prepare and pre-treat fruits and vegetables as outlined in this manual.

-It is relatively safe to leave the dehydrator on when dehydrating foods take a long time, but make sure to set the dehydrator in a safe place. Read the “Important Safeguards” on page 1 of this manual, and exercise safety when using this product.

-Exact dehydrating time varies greatly depending on several factors: Type, size and quality of food, quantity placed on trays and personal preference. It will help to keep a personal notepad where you can write down your own notes. Keep notes on the type of food, weight before and after drying, total drying time and final results

Image 6
Contents Warranty Limited WARRANTY* ONE 1 YearImportant Safeguards Parts & Features Polarize Plug & Short Cord Safety First USE & OperationVegetable Drying Chart Preparation & Pretreatment of VegetablesVegetable Preparation & Pretreatment Estimated Time Fruit Drying Chart Preparation & Pretreatment of FruitsFruit Preparation & Pretreatment Estimate Time Meat Drying Preperation Other Dryable ItemsHelpful Hints Packaging MaintenanceFood Storage Storage Conditions

EFD-1010 specifications

The Maximatic EFD-1010 is a cutting-edge device that has garnered considerable attention in the realm of precision dispensing technology. Designed for various industries, including electronics, automotive, and medical applications, the EFD-1010 stands out for its versatility and reliability.

One of the main features of the Maximatic EFD-1010 is its advanced microprocessor control, which allows for precise and consistent dispensing of fluids. This feature is essential for tasks that require high accuracy, such as circuit board assembly and intricate adhesive applications. The device can handle a wide range of materials, including low and high viscosity adhesives, sealants, and other fluids, making it a valuable tool for any production line.

Another significant characteristic of the EFD-1010 is its user-friendly interface. The device is equipped with a clear digital display that provides real-time information and allows operators to easily adjust dispensing parameters such as time, speed, and pressure. This interface minimizes the learning curve for new users and ensures that experienced operators can quickly optimize the device for varying applications.

In terms of technology, the EFD-1010 employs a state-of-the-art positive displacement pump system. This system ensures that each dispense is uniform and repeatable, which is crucial for quality assurance in manufacturing processes. Additionally, the system is designed to minimize waste, allowing for more economical use of dispensing materials.

The EFD-1010 also features a compact design, which makes it easy to integrate into existing production setups without requiring extensive modifications. Its portability allows manufacturers to deploy the device across multiple workstations as needed, enhancing workflow efficiency.

Moreover, the device incorporates safety features that protect operators during use. Automatic shutoff mechanisms and protective enclosures work together to reduce the risk of accidents, making it a safe choice for high-paced production environments.

In summary, the Maximatic EFD-1010 is an innovative and versatile dispensing solution that combines advanced technology, user-friendly operation, and safety features. Its ability to handle various materials with precision makes it a crucial asset for any manufacturer aiming to enhance productivity and quality in their production lines. With the EFD-1010, companies can confidently meet the demands of modern manufacturing while ensuring consistent results and minimizing waste.