Teledyne 212R Incorrect Operation, Analyzer Leak Teledyne Analytical Instruments

Page 21

Thermal Conductivity Analyzer

Model 212R

 

 

 

 

orincorrectinstrumentinstallation. Thefollowingconditionscanproducean erratic output from the analyzer:

1)Installation in an area that is subject to large changes in ambient temperature, direct sunlight, drafts from wind, blowers, or air condi- tioners. Any of the foregoing conditions will produce a bidirectional (diurnal) variation in output signal.

2)Sample gas with a moisture content of 10 ppm or greater. Again, the output will vary bi-directionality with ambient temperature changes. If the sample gas is known to have a fairly high moisture content a dryershouldbeinstalledinthesampleline.

3)Eventhesmallestleakanywhereinthesamplingsystemupstream from the analyzer, a small leak at a fitting, valve, or regulator, will cause almost constant variation in analyzer output. The resulting signal drift would be erratic and could be either bi-directional or unidirectional.

4)Acidinthesamplingsystem(solderingfluxes)willproducecontinu- ous, uncontrollable, unidirectional output signal drift. Sample tubing that has been treated with descaling chemicals, if subject to above ambient temperatures, will outgas continuously. Any form of acid in the sampling system will outgas at high temperatures and attack the hot wire elements of the cell.

5)Composition materials (diaphragms, tubing, etc.) in the sampling system will produce erratic, unpredictable changes in output signal level because of their permeability to gases other than the sample. The nylon tubing normally used in quick disconnect type sampling systems will produce diurnal output signal excursions in the order of 10 to 20% of the fine range of analysis.

6.4Incorrect Operation.

If the analyzer is not stable on zero gas, and the supporting gas installation has been made and checked in accordance with sections 2 and 3, the following procedures should be employed.

6.4.1 Analyzer Leak

Teledyne Analytical Instruments

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Teledyne Analytical Instruments Model 212RWarranty Table of Contents Introduction Periodic Maintenance Method of Analysis IntroductionSensitivity Physical ConfigurationStability Special ConsiderationInstallation LocationElectrical Requirements and Connections Regulating Transformer Teledyne Analytical Instruments Signal OutputGas Requirements and Connections Completion and InspectionReference Gas Zero GasSpan Gas Installation of Cylinder Supplies Interconnecting LinesSample Pressure Vent Lines StartupPreliminary Zero Gas Flow Reference Gas FlowWarmup Zero Standardization Teledyne Analytical InstrumentsBypass Span StandardizationFlowrates Teledyne Analytical Instruments Routine OperationStandardization Supporting Gas SuppliesTrouble Shooting Periodic MaintenanceHeater Fan Electrical Checks Teledyne Analytical InstrumentsSampling System Checks Summary of Preliminary ChecksLoss of Zero Control Dynamic Balance Procedure Correct Operation Analyzer Leak Teledyne Analytical Instruments Incorrect OperationTemperature Control Check Thermal Conductivity Analyzer Ranges Calibration Data for Model 212R Serial NumberSpan Setting Recommended Accessory Gases Output SignalQuantity Part no Description Recommended Spare Parts ListDrawing List Appendix

212R specifications

Teledyne 212R is a state-of-the-art underwater acoustic modem designed for robust communication in various marine environments. This advanced device is based on established principles of underwater acoustics and modern digital signal processing technologies, making it an optimal choice for applications ranging from oceanography to underwater robotics.

One of the standout features of the Teledyne 212R is its high data transmission capabilities, allowing for reliable communication at distances of up to several kilometers depending on environmental conditions. The modem supports various data rates, enabling flexible adaptation to the needs of different applications. This versatility makes it suitable for both low-bandwidth telemetry and high-data applications, such as video streaming from underwater drones.

The Teledyne 212R employs advanced modulation schemes that enhance its performance in challenging conditions. These modulation techniques, combined with sophisticated error correction algorithms, ensure the integrity of data transmission even in noisy environments. This resilience is crucial as it enables the modem to maintain communication in the presence of marine life, background noise, and varying temperatures.

Another remarkable characteristic of the Teledyne 212R is its compact and rugged design. Built to withstand harsh marine conditions, the modem is encapsulated in a pressure-resistant housing, making it suitable for deep-sea operations. Its durability ensures longevity and reliability, reducing the need for frequent maintenance or replacement, which can be costly in remote underwater settings.

Moreover, the modem features an array of integrated sensors that allow for real-time environmental monitoring. This capability can be pivotal for research organizations studying marine ecosystems or for oil and gas companies conducting underwater surveys. The ability to collect and transmit environmental data alongside operational data streamlines data-gathering efforts.

Ease of integration is another key aspect of the Teledyne 212R. It is compatible with a multitude of existing marine technologies and communication protocols, allowing for seamless deployment in diverse systems. This adaptability is essential for users requiring collaborative operations across multiple platforms, such as Autonomous Underwater Vehicles (AUVs) and remotely operated vehicles (ROVs).

In summary, the Teledyne 212R combines high-performance data transmission, advanced modulation techniques, rugged design, and environmental monitoring capabilities. This makes it an essential tool for anyone engaged in underwater research, exploration, or resource management, establishing it as a go-to choice in the field of underwater communication.
Top Page Image Contents