FoodSaver Accessories

to Open.

FoodSaver Bottle Stoppers

(without large knob on lid)

To release vacuum and open, push gray rubber button on lid.

FoodSaver Bulk Canisters and Quick Marinators (with large knob on lid) and Universal Lids

To release vacuum and open, turn knob on lid

FoodSaver Vacuum Packaging Canisters

FoodSaver Jar Sealer with Mason Jars

Press and Release Lid

Insert Accessory Hose

How to Vacuum Package with FoodSaver Accessories

Set Seal Control Switch

QS.1095_v2 4/29/04 2:29 PM Page 3

Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.

FoodSaver Accessory Guidelines

1.Always leave at least one inch of space between contents and rim.

2.Wipe rim of canister, container or bottle to ensure it is clean and dry.

3.Place lid on canister or container, or place stopper in bottle.

4.For accessories with a large knob on lid, turn knob to Vacuum. Vacuum package using instructions below. When vacuum process is complete, turn knob to Closed before removing Accessory Hose.

5.For accessories without a large knob on lid, vacuum package using instructions below.

1.	Prepare container according to FoodSaver	5.	When motor and Indicator Light (F) turn off,
	Accessory Guidelines above.		vacuum process is complete.
2.	Insert one end of Accessory Hose (A) into	6.	Gently twist and remove Accessory Hose from
	Accessory Port (E) on appliance. Insert other		accessory and appliance.
	end into port on accessory. Twist gray tab while	7.	To test vacuum, simply tug on accessory lid. It
	inserting to ensure a tight fit.		should not move.
3.	Turn Seal Control Switch (G) to Vacuum and Seal.	Note: For important tips on using accessories
		Note: For important tips on using accessories

4.To begin vacuum process, press down firmly on lid

	with different foods, please refer to the FoodSaver
until motor starts, wait 3-5 seconds, then release.	Reference Guide.	Accessories

Motor will continue to run.

How to Open FoodSaver Accessories after Vacuum Packaging

For use with Ball® and Kerr ® brand Mason jars.

IMPORTANT: Do NOT use screw bands when vacuum packaging jars. To open, wedge spoon between Mason jar lid and highest part of threaded rim. Twist spoon gently to release vacuum.

To release vacuum and open, twist and pull up on

Bottle Stopper.