How to
Make a Bag from a FoodSaver® Vacuum Sealing Roll
How to
Vacuum Seal with FoodSaver® Vacuum Sealing Bags
1. Using scissors, cut enough bag material to hold item, plus 3 inches (7.6cm).
Fig. 1
1. Begin with a FoodSaver® Vacuum Sealing System Bag (Fig. 1) | Fig. 1 |
|
(or create a bag as described in the “How to Make a Bag from |
| |
3inches | ||
a FoodSaver® Vacuum Sealing Roll” section). |
|
|
| SEALED | END |
|
| |
|
| D |
OPEN | END |
|
2. Rotate latch to unlock, lift sealing door, place bag over sealing strip (Fig. 1).
how to
3.Lower door and rotate latch. Press Seal button (Fig. 2).
Fig. 2
4.After red light goes off, rotate latch to unlock, lift door and remove bag (Fig. 3).
Fig. 3
5.Now you are ready to vacuum seal with your new bag (see next page).
2. Lift door, insert bag end (Fig. 2). | Fig. 2 |
2
Fig. 3
3. Lower door and rotate latch.
Press Vacuum & Seal button (Fig. 3).
Fig. 4
4. Once Seal light goes off, unlatch, lift door and remove sealed bag (Fig. 4).
how to
5 | www.foodsaver.com | www.foodsaver.com | 6 |