Yeoman YM-CKWDGR-L, YM-CKWDWH-L, YM-CKWDPB-R Installing the Cooker, Stovax Part No Description

Page 10

INSTALLATION INSTRUCTIONS

Because each installation is unique to the property, it is not possible to give full details to suit every setting. However the installation should comply with the requirements of the Building Regulations and be made using “best practice” construction methods.

Remember that many fireplace openings will have a supporting lintel. Do not remove this without making provision to support the remaining structure of the building. The Solid fuel cooker must not form any part of the supporting structure.

1. INSTALLING THE COOKER

1.1Remove all packing and temporary transportation fixings from the Solid fuel cooker, check that no parts have been left inside the cooker.

1.2Take care handling the cooker as it is possible damage the enamel finish. The hot plate area may be removed to reduce the weight, but take care not to damage any seals, and beware of any sharp edges when handling the cooker or any parts.

1.3If the cooker is to be placed between combustible work surfaces and cupboards the optional, insulating, side panels must be fitted.

Stovax Part No.

 

Description

 

YM-CKSPWH

 

Yeoman SF Cooker Insulation

 

 

Panel 5cm White

YM-CKSPBL

 

Yeoman SF Cooker Insulation

 

 

Panel 5cm Blue

YM-CKSPGR

 

Yeoman SF Cooker Insulation

 

 

Panel 5cm Green

YM-CKSPPB

 

Yeoman SF Cooker Insulation

 

 

Panel 5cm Pebble

YM-CKSPINT

 

Yeoman SF Cooker Integral

 

 

Insulation Panel

1.4The clearance to any side wall and the firebox side of the cooker should be a minimum of 50mm, to allow the firedoor to open fully.

1.5Decide it the installation is to be top, rear or side flue exit, and fit and seal, with fire cement, the flue collar and blanking plate to suit. The flue collar attaches to the cooker backplate or top plate with fixings supplied. The blanking plates are fixed to the unused flue outlets with fixings supplied.

1.6Lift the cooker into position on the prepared hearth area, taking care not to damage the hearth finish.

1.7Level cooker using adjustable feet.

1.8Connect the cooker to the chimney system, using Stovax enamelled flue pipe and seal the connecting joints. Typical top, rear or side flue connections are shown.

1.9Provision must be made to clean the flue/chimney after the cooker is installed, as it is not possible to clean through the cooker when it is installed.

1.10Provision should be made for flue debris collection and cleaning when the cooker is installed.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Solid Fuel Cooker Contents Essential Information Must be Completed Installation EngineerYeoman Dealer Appliance WAS Purchased from Commissioning Checks to be Completed and SignedTechnical Specification Model Solid fuel cookerSolid Fuel Cooker Dimensions Right hand cooker shown Site Requirements Hearth Dimensions Site Requirements Walls Adjacent to Hearths Flue or Chimney Additional Ventilation Installing the Cooker Stovax Part No DescriptionCommissioning Installation Instructions General Using the Cooker for the First TimeCare of the Cooker Burning Wood Burning Solid FuelSeasonal USE OVER-FIRING Oven TemperatureASH Removal Recommended Fuels Annual Service General CleaningCleaning Glass Chimney SweepingTask Product name Stovax Code number Page Yeoman Stoves

YM-CKWDBL-R, YM-CKWDPB-L, YM-CKWDBL-L, YM-CKWDGR-R, YM-CKWDWH-R specifications

The Yeoman YM-CKWDWH-L, YM-CKWDPB-R, YM-CKWDGR-L, YM-CKWDWH-R, and YM-CKWDGR-R are innovative devices designed to enhance operational efficiency and user experience across various industries. Each model comes equipped with advanced technologies that set them apart in their respective categories.

The YM-CKWDWH-L is characterized by its lightweight design and robust functionality. This model integrates cutting-edge sensors that monitor environmental conditions, making it suitable for outdoor applications. Its high-precision data collection capabilities ensure accuracy in real-time data analysis, beneficial for users in sectors such as agriculture, meteorology, and logistics.

On the other hand, the YM-CKWDPB-R is optimized for industrial use, featuring enhanced durability and superior performance. It employs a unique power management system that extends its operational lifespan, which is crucial for environments where continuous operation is mandatory. Moreover, it includes a user-friendly interface designed to facilitate easy navigation and control.

The YM-CKWDGR-L, distinguished by its green technology, is an environmentally conscious choice for users looking to reduce their carbon footprint. It operates on renewable energy sources and incorporates energy-efficient components, making it an attractive option for organizations committed to sustainability.

In contrast, the YM-CKWDWH-R offers advanced wireless connectivity features that allow seamless integration with existing systems. This model supports various communication protocols, ensuring compatibility with a wide range of devices. Its adaptability makes it ideal for businesses seeking to upgrade their infrastructure without undergoing extensive overhauls.

Lastly, the YM-CKWDGR-R combines innovation with resilience. Engineered with rugged materials, it withstands challenging conditions without compromising performance. This model is particularly well-suited for sectors that require reliability in harsh environments, such as construction and emergency services.

In summary, the Yeoman YM-CKWDWH-L, YM-CKWDPB-R, YM-CKWDGR-L, YM-CKWDWH-R, and YM-CKWDGR-R offer a diverse range of features tailored to meet varying user needs. From lightweight designs and energy efficiency to advanced connectivity and durability, these models cater to industries looking for efficiency, reliability, and innovation in their operations.
Top Page Image Contents