Extended burning, Over-Firing, Chimney fire

USER INSTRUCTIONS

•Remove ashpan and empty

Warning: Heat can remain in the ash long after use. .

7.3Use gloves, or place the ash into a Stovax Ash Caddy (Stovax Part No. 4227)

7.4Do not place hot ash in a bin made from plastic or any other combustible material.

8.EXTENDED burning

8.1It is possible to get the appliance to burn for extended periods of time.

In order to do this:

•De-ash prior to final refuelling

•Set air controls to low combustion settings

This will blacken the glass over night but it will clear when operated at high output for a short period.

•Use smokeless fuel or small, thick logs depending on fuel desired

9.OVER-FIRING

9.1Do not over-fill with fuel or use at maximum output for long periods or over-firing can occur. If the flue pipe, flue collar or top plate glow red the appliance is over-firing:

•Close the air controls to reduce the output

9.2Over-firing can cause permanent damage to the appliance.

10.Chimney fire

10.1If a chimney fire occurs:

•Shut all air controls immediately

•Evacuate the building

•Call the fire brigade

•Do not re-enter the building until it is confirmed safe

10.2Do not use the appliance after a chimney fire until: a) It has been inspected by a registered installer, confirming the appliance is safe to use*

b) The chimney system is inspected and swept by a chimney sweep, confirming the system is structurally sound and free from obstruction before re-use.**

In the U.K:

*This should be done by a HETAS registered chimney sweep, who will issue you with a certificate.

c)It is repaired as required before re-use. Use only genuine Stovax replacement parts to keep your appliance in safe and efficient working order.

11.GENERAL CLEANING

11.1Clean and inspect your appliance regularly, especially in periods of heavy use. Regular cleaning and maintenance will help give many years of safe use.

• Allow appliance to cool thoroughly to avoid risk of burns.

• Remove the ash completely, See Section 7

• Check the internal components for damage; grates, bricks and baffles. Do not use the appliance if any parts are broken or damaged

• Check for obvious build up of soot, any ash or debris above the flue baffle(s). Use a torch if necessary

• If there are any signs of a build up of debris above the flue baffle(s) either:

•Arrange for the chimney to be swept, See Section 13

•Remove the baffles and clear the debris, See Section

3 Installation Section

•Check that the door(s) shut properly and creates an effective seal

Leaking door seals prevent the appliance working properly.

Do not use aerosol sprays near an operating appliance

12.CLEANING GLASS

•Keep the glass clean with correct use of the Airwash system and good quality fuel

Sometimes additional cleaning may be required.

12.1This can be done as follows:

•Allow appliance to cool fully

Do not clean hot glass.

•Use a soft cloth and Stovax Glass Cleaner

12.2Before re-lighting the appliance:

•Dry the glass fully

12.3Do not use abrasive cleaner or cleaning pads.

YM-W9001FL specifications

The Yeoman YM-W9001FL is a versatile and efficient wood-burning stove that combines modern technology with classic design. This stove offers an impressive balance between functionality, aesthetic appeal, and sustainability. Its robust build quality and sleek lines make it an attractive addition to any home, while its operational features ensure optimal performance.

One of the standout features of the YM-W9001FL is its efficient combustion technology. The stove is designed to maximize heat output while minimizing emissions. With an impressive efficiency rating, this stove burns wood more completely, producing less smoke and particulate matter. This makes it not only an environmentally friendly choice but also a cost-effective one, allowing homeowners to save on fuel while enjoying consistent warmth.

The YM-W9001FL is equipped with a large viewing window, allowing users to enjoy the mesmerizing flames while maintaining effective heat distribution. The air wash system ensures that the glass stays clean, providing an unobstructed view of the fire. The design also includes a modern control system that regulates airflow, thus enhancing combustion efficiency and enabling users to manage the fire's intensity effortlessly.

In terms of size, the YM-W9001FL is compact but efficient, making it suitable for a variety of spaces, from cozy cabins to contemporary homes. The stove is available in a range of finishes, enabling homeowners to select a style that complements their interior décor. This versatility extends to its installation options, as the stove can be installed as a freestanding unit or fitted into an existing fireplace.

The stove meets stringent regulatory standards for emissions and is built with high-quality materials to ensure durability and longevity. Its cast iron construction provides excellent heat retention, allowing it to stay warm long after the fire has died down. Furthermore, it features an easy-to-clean design, with removable ash pans that simplify maintenance.

Overall, the Yeoman YM-W9001FL is a sophisticated choice for those seeking an efficient, environmentally friendly wood-burning stove that does not compromise on style or performance. Its blend of innovative technology, timeless design, and user-friendly features make it an excellent investment for any homeowner looking to enhance their living space with the warmth and ambiance of a real fire.