Yeoman YM-E9001FLA manual Replacing the Motor & Effects Unit, Replacing the Middle LED Board

Page 11

SERVICING

REPLACING THE MOTOR & EFFECTS UNIT

8

Motor unit

Plug

AR2394

1.14The motor & effects unit is attached by 4 x screws located at the rear of the appliance. It may be necessary to move the appliance from its location to gain access to the rear of the stove. Remove the 4 screws on the lower rear casing.

Note: There are 2 x gaskets between the unit and the appliance. Remove and keep in a safe place.

1.15Disconnect the 2 x wires connecting the 2 x 'flying' LEDs to the front LED board, noting their orientation.

1.16Lift and rotate the motor unit to give access to the rear LED board.

1.17Disconnect both wires from the rear LED board, noting their orientation.

1.18Unplug the cables connecting the motor unit and the PCB.

1.19The motor and effects unit can now be removed and replaced as a whole unit.

1.20Replace in reverse order. Ensure to replace gaskets when reattaching motor to appliance body and that all wires are correctly connected.

REPLACING THE MIDDLE LED BOARD

The middle LED board is attached to the motor unit but can be replaced individually (see Diagram 9).

9Rear LED board

Middle LED board

AR2395

1.21Disconnect the wire connecting the middle LED board to the rear LED board, noting its orientation.

1.22Attach the new board and reconnect the wire.

REPLACING THE REAR LED BOARD

The rear LED board is attached to the motor unit but can be replaced individually (see Diagram 9).

1.23Remove the motor unit following instructions in 1.14 - 1.17 (it is not necessary to disconnect the motor unit from the PCB) and rotate to access the rear LED board.

1.24Release the board by removing the 2 x screws at either end of it.

1.25Disconnect the wire connecting the rear LED board to the front LED board, noting its orientation.

1.26Attach the new board using the 2 x screws and reconnect the wire.

1.27Replace motor and effects unit (see 1.14 - 1.20). Ensure to replace gaskets when reattaching motor to appliance body and that all wires are correctly connected.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Electric Exmoor & Dartmoor Contents Important informAtion How to Use these InstructionsHealth and Safety User InstructionsRemote and Manual Operation Location of Power SwitchOperating instructions GeneralCleaning LOG Moulding MaintenanceThermal Safety Cutout Cleaning AIR InletsRemoving & Replacing Doors & removal of fuel bed ALL Inglenook Fireplace Openings Installation InstructionsSite Requirements This Appliance Must be EarthedFor MARLBOROUGH, MANHATTAN, Stockton & Stockton Fault FindingHOW to Wire a plug Fitting StovesTypical European Type 15/16/17Replacing the Printed Circuit Board ServicingServicing Requirements Replacing Front LED BoardReplacing the Rear LED Board Replacing the Motor & Effects UnitReplacing the Middle LED Board Replacing the Heater Assembly Spare Parts List

YM-E9001FLA specifications

The Yeoman YM-E9001FLA is a highly innovative and advanced multi-functional electric fireplace that has gained considerable attention for its impressive features and contemporary design. It seamlessly merges the aesthetic appeal of a traditional fireplace with cutting-edge technology, making it a perfect addition to modern homes.

One of the standout features of the Yeoman YM-E9001FLA is its realistic flame effect. Utilizing advanced LED technology, it creates a lifelike flame appearance that simulates the ambiance of a traditional fire. The adjustable flame brightness allows users to customize the intensity to their liking, delivering warm and inviting illumination in any living space. This feature is particularly appealing for those who wish to enjoy the look of a fireplace without the need for a chimney or venting.

The FM registration and built-in thermostat are among the YM-E9001FLA's key technologies, providing efficient heating for rooms up to a specified size. The thermostat allows users to maintain a comfortable room temperature by automatically adjusting the heating output. This not only ensures a cozy atmosphere but also enhances energy efficiency, reducing electricity costs.

Another remarkable characteristic of the Yeoman YM-E9001FLA is its sleek and modern design. Available in various finishes, including stylish black, glossy white, or traditional oak, it can enhance the decor of any room, from contemporary to classic styles. The minimalist frame and clean lines provide a visually appealing focal point while fitting seamlessly into diverse interior designs.

The unit also incorporates user-friendly controls with a remote option, making it easy to operate from anywhere in the room. Features include a timer setting, allowing users to pre-program heating schedules according to their preferences. Safety is also a priority, with an automatic shut-off feature that activates in case of overheating, ensuring peace of mind for users.

In conclusion, the Yeoman YM-E9001FLA represents the perfect fusion of style, functionality, and safety. With its lifelike flame effects, efficient heating capabilities, and modern design, it is a superb choice for anyone looking to enhance their home with the charm of a fireplace, all while enjoying the benefits of modern technology.
Top Page Image Contents