Yeoman YM-E9001FLA manual Operating instructions, General, Location of Power Switch

Page 4

USER INSTRUCTIONS

2. Operating instructions

WARNING! Do not operate the appliance if it is damaged or has malfunctioned. If you suspect the appliance is damaged or has malfunctioned call a qualified service engineer to inspect the appliance, and replace any part of the electrical system if necessary, before reuse.

GENERAL

2.1The appliance can be operated by the infrared handset or the manual controls on the bottom right hand side of the stove.

PREPARATION BEFORE USE Batteries:

2.2Ensure that the handset battery is new and is inserted correctly.

2.3Dispose of any worn out batteries safely at your recycling centre on replacement.

When using the handset:

2.4Ensure the handset is pointed at the infrared sensor located behind the flame effect screen at the back of the inside of the appliance.

LOCATION OF POWER SWITCH

2.5The mains power switch is located on the control panel on the lower right-hand side of the stove (see Diagram 1).

2.6Switch ON (—) before operating either the remote or manual controls.

2.7A beep is heard to indicate the fire is ready for use.

REMOTE AND MANUAL OPERATION

2.8The following functions can be controlled using the manual controls or remote handset:

—Heat settings 1 and 2

—Brightness of the fuel and flame effect

—Colour of the flames

2.9The Standby function and the thermostat can only be operated via the manual controls.

2.10The effects can be turned off using the remote, returning the appliance to Standby.

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flame effect button

Thermostat

 

 

Standby

 

 

 

 

 

 

 

On/Off Switch

 

 

 

Heat setting button

 

AR2389

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

On/Off button

Flame effect

 

 

 

 

 

 

 

 

 

 

Heat setting 1kW

Heat setting 2kW

AR2390

Standby ON/OFF:

2.11The appliance is in Standby mode when the power is switched on via the manual control panel. You must have this power supply ON (—) before using the manual or remote controls (see 2.3).

Turning On the Appliance Flame Effects:

2.12The flame effect button on both the manual and remote controls has 4 settings:

—Press once for maximum brightness of fuel and flame effects.

—Press twice for medium brightness.

—Press three times for minimum brightness.

—Press four times for maximum brightness of fuel and additional blue and green flame effects.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Electric Exmoor & Dartmoor Contents How to Use these Instructions Health and SafetyUser Instructions Important informAtionLocation of Power Switch Operating instructionsGeneral Remote and Manual OperationMaintenance Thermal Safety CutoutCleaning AIR Inlets Cleaning LOG MouldingRemoving & Replacing Doors & removal of fuel bed Installation Instructions Site RequirementsThis Appliance Must be Earthed ALL Inglenook Fireplace OpeningsFault Finding HOW to Wire a plugFitting Stoves For MARLBOROUGH, MANHATTAN, Stockton & StocktonType 15/16/17 Typical EuropeanServicing Servicing RequirementsReplacing Front LED Board Replacing the Printed Circuit BoardReplacing the Middle LED Board Replacing the Motor & Effects UnitReplacing the Rear LED Board Replacing the Heater Assembly Spare Parts List

YM-E9001FLA specifications

The Yeoman YM-E9001FLA is a highly innovative and advanced multi-functional electric fireplace that has gained considerable attention for its impressive features and contemporary design. It seamlessly merges the aesthetic appeal of a traditional fireplace with cutting-edge technology, making it a perfect addition to modern homes.

One of the standout features of the Yeoman YM-E9001FLA is its realistic flame effect. Utilizing advanced LED technology, it creates a lifelike flame appearance that simulates the ambiance of a traditional fire. The adjustable flame brightness allows users to customize the intensity to their liking, delivering warm and inviting illumination in any living space. This feature is particularly appealing for those who wish to enjoy the look of a fireplace without the need for a chimney or venting.

The FM registration and built-in thermostat are among the YM-E9001FLA's key technologies, providing efficient heating for rooms up to a specified size. The thermostat allows users to maintain a comfortable room temperature by automatically adjusting the heating output. This not only ensures a cozy atmosphere but also enhances energy efficiency, reducing electricity costs.

Another remarkable characteristic of the Yeoman YM-E9001FLA is its sleek and modern design. Available in various finishes, including stylish black, glossy white, or traditional oak, it can enhance the decor of any room, from contemporary to classic styles. The minimalist frame and clean lines provide a visually appealing focal point while fitting seamlessly into diverse interior designs.

The unit also incorporates user-friendly controls with a remote option, making it easy to operate from anywhere in the room. Features include a timer setting, allowing users to pre-program heating schedules according to their preferences. Safety is also a priority, with an automatic shut-off feature that activates in case of overheating, ensuring peace of mind for users.

In conclusion, the Yeoman YM-E9001FLA represents the perfect fusion of style, functionality, and safety. With its lifelike flame effects, efficient heating capabilities, and modern design, it is a superb choice for anyone looking to enhance their home with the charm of a fireplace, all while enjoying the benefits of modern technology.
Top Page Image Contents