28
Installation and Service Check List
Boiler Model: _______________________ | Serial No.: ____________________ |
Installation Date: ______________________ |
|
Installer Name: ________________________ | Phone No.: ____________________ |
Boiler Installation |
|
□Boiler level and in solid contact with floor?
□Boiler and burner wired per wiring diagram and National Electric Code? 120VAC wiring Type_____ Size _____ AWG
□Burner sealed to boiler? Mounting nuts tight?
□Space is large enough to provide required clearances?
□NFPA 31 Installation of Oil Burning Equipment followed?
□Local, state and national codes, laws, regulations and ordinances followed?
Vent System
□Existing chimney and vent system inspected to NFPA 211 and in good condition?
□New vent pipe installed and properly sealed?
□Vent size checked against furnace manual and codes?
Burner Operation
□Burner Model: __________________ Nozzle: _______GPH _______Deg. ____Type_______
□Burner Pump Pressure: ______________
□Fuel filter and fuel lines installed and inspected as per burner manual?
□Air bled from oil piping? Piping checked for leaks?
□Burner started, adjusted and tested per burner manual?
Boiler Operation
□Thermostat heat anticipator set per burner manual instructions?
□Limit control tested for proper operation?
□Boiler observed going through several operational cycles for proper operation? Post Installation
□Reviewed owners’ information in this manual with owner or maintenance personnel and instructed to keep for future reference?
□Properly filled in and returned warranty registration card to Boyertown Furnace Co. Inserted burner manual instructions with furnace manual for future us