General, Installation, Unpacking, Location

Installation, Operation, and Care of

BERKEL FMS60 Quart MIXER

SAVE THESE INSTRUCTIONS

GENERAL

The 60 quart mixer has an AC Induction electric motor and motor control. A 60 quart bowl, B-Flat beater, bowl guard, spiral dough hook, D wire whip, bowl truck, and ingredient chute are shipped as standard equipment. A 0 - 15 minute timer and four plastic foot pads are standard. A #12 attachment hub is standard. A variety of attachments are available. A 30 quart (step-down) bowl and accessories are optional.

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If the mixer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine data plate.

LOCATION

Remove hex head shipping bolts with an open end wrench (or crescent wrench), that attaches the four legs to the base-frame of the carton.

Place the mixer on a suitable sturdy level surface. There should be adequate space around the mixer for the user to operate the controls and install and remove bowls.

FMS60 Owner/Operator Manual

– 3 –