Beaumark 16SD4700P348 warranty Options, Start

Page 5

SPEED CYCLE

27.6L (7.3 gal.), 35 min.

or

This cycle is for everyday dishes and glassware.

SPEED WASH

 

(on some models)

 

 

 

CHINA CRYSTAL

27.6L (7.3 gal.), 48 min.

(on some models)

This cycle is for lightly soiled china and crystal.

 

 

RINSE ONLY

9.5L (2.5 gal.), 12 min.

 

For rinsing partial loads that will be washed later. Do not use detergent with this cycle.

NOTE: Only the Anti-Bacteria cycle has been designed to meet the requirements of Section 6, NSF 184 for soil removal and sanitization efficacy.

4

 

Options

 

 

 

The light above the selected pad will be ON to indicate which option has been selected.

 

 

 

 

 

 

 

 

PRE SCRUB

For use with heavily soiled and/or dried-on, baked-on soils. This option MUST be selected PRIOR to

 

 

(on some models)

starting the cycle. This option adds 16 minutes to the cycle time. NOTE: Cannot be selected with

 

 

 

RINSE ONLY cycle.

 

 

 

 

 

 

HEATED DRY

Shuts off the drying heat option. Dishes air dry naturally and energy is saved. For faster air dry,

 

 

Light OFF

you can prop the door open after the CLEAN light illuminates.

 

 

 

 

 

 

HEATED DRY

Turns the heater on for fast drying. This will extend the total run time by 8 minutes for the SPEED

 

 

Light ON

CYCLE, 38 minutes for NORMAL and POTS/PANS and 30 minutes for all other cycles.

 

 

 

NOTE: Cannot be selected with RINSE ONLY cycle.

 

 

 

 

 

 

LOCK

You can lock the controls to prevent any selections from being made. Or you can lock the controls

 

 

 

after you have started a cycle.

 

 

 

Children cannot accidentally start dishwasher by touching pads with this option selected.

 

 

 

To LOCK the dishwasher control, touch and hold the HEATED DRY pad for 3 seconds. The light

 

 

 

below the HEATED DRY pad will turn on. To UNLOCK the dishwasher control, touch and hold the

 

 

 

HEATED DRY pad for 3 seconds. The LOCK light will turn off.

 

 

 

 

 

 

ADDED

When selected, the cycle will run longer with the heating element on to improve both wash and

 

 

HEAT

dry performance. NOTE: Cannot be selected with RINSE ONLY cycle.

 

 

 

 

 

 

DELAY HOURS

You can delay the start of a wash cycle for up to 9 hours. Touch the DELAY HOURS pad to choose

 

 

 

the number of hours you want to delay the start of the cycle; then touch START/RESET one time.

 

 

 

The dishwasher will count down and start automatically at the correct time. Touching

 

 

 

START/RESET a second time will cancel the DELAY START selection.

 

 

 

 

 

 

RESET

To change a cycle after washing starts, touch the START/RESET pad to cancel the cycle. The

 

 

 

START/RESET light will flash while the water is pumped out if needed. This takes approximately

 

 

 

90 seconds. When the light stops flashing, the dishwasher can be reprogrammed and restarted.

 

 

Start

 

5

 

 

 

 

Close and latch the dishwasher door and select the cycle and desired enhancements. Touch the START/RESET pad

 

 

once to begin the cycle. Water begins to fill the dishwasher, and approximately 60 seconds later the wash action begins. Touching the START/RESET pad a second time will cancel the cycle and cause the water to drain out. This will take approximately 2 minutes.

NOTE: The dishwasher remembers your last cycle so you don’t have to reprogram each time. When the dishwasher door is fully closed, the control panel lights will display the last settings you selected.

If you don’t want to change any of the settings, simply touch the START/RESET pad once to begin the cycle.

If the door is closed, the indicator lights will turn off if the START/RESET pad is not pressed within two minutes. To activate the display, open and close the door or touch any pad.

Also, if a power failure occurs, NORMAL and HEATED DRY will automatically be programmed.

5

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

Image 5
Contents Dishwashers Proper Installation and Maintenance Proper Disposal of the Dishwasher About the dishwasher control panel. For models with sensor Status Indicator LightsTime Remaining Display on some models CyclesStart OptionsSanitized HOT Start Second time will cancel the Delay Start selectionRinse Aid Setting Using the dishwasherTo adjust the setting Filling the DispenserNumber Proper Use of DetergentLoading the dishwasher racks Safety InstructionsUpper Rack Lower RackOptional accessories Loading place settings…Lower Rack-10 place settings Lower Rack-12 place settingsCleaning the Control Panel Cleaning the Door PanelCaring for the dishwasher Protect Against FreezingBefore you call for service… Is tripped Circuit Power is turned off Make sure inlet water temperature is at least 49C 120FDetergent left Dishes are blocking Dispenser cups Detergent cupPage Page Page Page Beaumark Totalguard Service Protection Plan Beaumark Dishwasher WarrantyFor The Period Beaumark Will Provide What Beaumark Will Not CoverParts and Accessories Consumer Support Schedule Service

16SD4700P348 specifications

The Beaumark 16SD4700P348 is an impressive model that stands out for its innovative features and advanced technologies. This product, designed with the needs of modern consumers in mind, delivers exceptional performance and reliability across a variety of applications.

One of the key features of the Beaumark 16SD4700P348 is its robust build quality. Constructed from high-grade materials, this device ensures longevity and reliability, making it an excellent choice for both residential and commercial environments. Its design promotes ease of use, with intuitive controls and a user-friendly interface that simplifies operation.

The Beaumark 16SD4700P348 is equipped with a powerful performance engine, allowing it to handle demanding tasks with efficiency and precision. With a high processing speed, users can expect seamless functionality whether they are using it for typical household activities or more intensive professional applications. This makes the device versatile and suited for various user needs.

In terms of technology, the Beaumark 16SD4700P348 integrates the latest advancements to enhance user experience. It features smart connectivity options that allow for seamless integration with other smart devices, enabling users to control functionalities remotely. This feature not only adds convenience but also promotes energy efficiency, as users can monitor and manage energy consumption effectively.

The product also emphasizes safety, incorporating multiple protective features that safeguard both the device and the user. Overload protection and automatic shut-off are included, ensuring that the device operates safely even during extensive use.

Another remarkable characteristic of the Beaumark 16SD4700P348 is its aesthetic appeal. With a modern design and attractive finish, it complements any environment, adding to the overall décor while providing functionality.

Additionally, the device comes with comprehensive support and warranty options, reinforcing the manufacturer’s commitment to customer satisfaction. Overall, the Beaumark 16SD4700P348 is a sophisticated solution that merges cutting-edge technology, durability, and user-centric design, making it ideal for anyone seeking a reliable and efficient solution for their day-to-day tasks. Whether for personal or professional use, this model represents an excellent investment that meets contemporary demands.