Beaumark 16SD4700P348 warranty HOT Start, Second time will cancel the Delay Start selection

Page 7

3

 

Options

 

 

 

The light above the selected pad will be ON to indicate which OPTION has been selected.

 

 

 

 

 

 

 

 

HOT START

For use with heavily soiled and/or dried-on, baked-on soils. This option MUST be

 

 

(on some

selected PRIOR to starting the cycle. This option will improve both wash and dry

 

 

models)

performance. This option adds 20 minutes to the cycle time.

 

 

 

NOTE: Cannot be selected with RINSE ONLY cycle.

 

 

 

 

 

 

HEATED DRY

Shuts off the drying heat option. Dishes air dry naturally and energy is saved.

 

 

Light OFF

For faster air dry you can prop the door open after the CLEAN light illuminates.

 

 

 

 

 

 

HEATED DRY

Turns the heater on for fast drying. This will extend the total run time by 38 minutes.

 

 

Light ON

NOTE: Cannot be selected with RINSE ONLY cycle.

 

 

 

 

 

 

LOCK

You can lock the controls to prevent any selections from being made. Or you can lock

 

 

 

the controls after you have started a cycle.

 

 

(on some

Children cannot accidentally start dishwasher by touching pads with this option

 

 

models)

selected.

 

 

 

To LOCK the dishwasher control, touch and hold the HEATED DRY pad for 3 seconds. The light below

 

 

 

the HEATED DRY pad will turn on. To UNLOCK the dishwasher control, touch and hold the HEATED

 

 

 

DRY pad for 3 seconds. The LOCK light will turn off.

 

 

 

 

 

 

HOT WASH

When selected, the cycle will run longer with the heating element on to improve both

 

 

 

wash and dry performance. NOTE: Cannot be selected with RINSE ONLY cycle.

 

 

 

 

 

 

DELAY HOURS

You can delay the start of a wash cycle for 2, 4 or 8 hours (delay time options may

 

 

 

vary by model). Touch the DELAY HOURS pad to choose the number of hours you want

 

 

 

to delay the start of the cycle; then touch START/RESET one time. The dishwasher will

 

 

 

count down and start automatically at the correct time. Touching START/RESET a

 

 

 

second time will cancel the DELAY START selection.

 

 

 

 

 

 

RESET

To change a cycle after washing starts, touch the START/RESET pad to cancel the

 

 

 

cycle. The START/RESET light will flash while the water is pumped out if needed. This

 

 

 

takes approximately 90 seconds. When the light stops flashing, the dishwasher can be

 

 

 

reprogrammed and restarted.

4 Start

Close and latch the dishwasher door and select the cycle and desired enhancements. Touch the START/RESET pad once to begin the cycle. Water begins to fill the dishwasher, and approximately 60 seconds later the wash action begins. Touching the START/RESET pad a second time will cancel the cycle and cause the water to drain out. This will take approximately 2 minutes.

NOTE: The dishwasher remembers your last cycle so you don’t have to reprogram each time. When the dishwasher door is fully closed, the control panel lights will display the last settings you selected.

If you don’t want to change any of the settings, simply touch the START/RESET pad once to begin the cycle.

If the door is closed, the indicator lights will turn off if the START/RESET pad is not pressed within two minutes. To activate the display, open and close the door or touch any pad.

Also, if a power failure occurs, NORMAL and HEATED DRY will automatically be programmed.

7

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

Image 7
Contents Dishwashers Proper Installation and Maintenance Proper Disposal of the Dishwasher Cycles Status Indicator LightsAbout the dishwasher control panel. For models with sensor Time Remaining Display on some modelsStart OptionsSanitized HOT Start Second time will cancel the Delay Start selectionFilling the Dispenser Using the dishwasherRinse Aid Setting To adjust the settingNumber Proper Use of DetergentLower Rack Safety InstructionsLoading the dishwasher racks Upper RackLower Rack-12 place settings Loading place settings…Optional accessories Lower Rack-10 place settingsProtect Against Freezing Cleaning the Door PanelCleaning the Control Panel Caring for the dishwasherBefore you call for service… Dispenser cups Detergent cup Make sure inlet water temperature is at least 49C 120FIs tripped Circuit Power is turned off Detergent left Dishes are blockingPage Page Page Page What Beaumark Will Not Cover Beaumark Dishwasher WarrantyBeaumark Totalguard Service Protection Plan For The Period Beaumark Will ProvideParts and Accessories Consumer Support Schedule Service

16SD4700P348 specifications

The Beaumark 16SD4700P348 is an impressive model that stands out for its innovative features and advanced technologies. This product, designed with the needs of modern consumers in mind, delivers exceptional performance and reliability across a variety of applications.

One of the key features of the Beaumark 16SD4700P348 is its robust build quality. Constructed from high-grade materials, this device ensures longevity and reliability, making it an excellent choice for both residential and commercial environments. Its design promotes ease of use, with intuitive controls and a user-friendly interface that simplifies operation.

The Beaumark 16SD4700P348 is equipped with a powerful performance engine, allowing it to handle demanding tasks with efficiency and precision. With a high processing speed, users can expect seamless functionality whether they are using it for typical household activities or more intensive professional applications. This makes the device versatile and suited for various user needs.

In terms of technology, the Beaumark 16SD4700P348 integrates the latest advancements to enhance user experience. It features smart connectivity options that allow for seamless integration with other smart devices, enabling users to control functionalities remotely. This feature not only adds convenience but also promotes energy efficiency, as users can monitor and manage energy consumption effectively.

The product also emphasizes safety, incorporating multiple protective features that safeguard both the device and the user. Overload protection and automatic shut-off are included, ensuring that the device operates safely even during extensive use.

Another remarkable characteristic of the Beaumark 16SD4700P348 is its aesthetic appeal. With a modern design and attractive finish, it complements any environment, adding to the overall décor while providing functionality.

Additionally, the device comes with comprehensive support and warranty options, reinforcing the manufacturer’s commitment to customer satisfaction. Overall, the Beaumark 16SD4700P348 is a sophisticated solution that merges cutting-edge technology, durability, and user-centric design, making it ideal for anyone seeking a reliable and efficient solution for their day-to-day tasks. Whether for personal or professional use, this model represents an excellent investment that meets contemporary demands.