Moyer Diebel DF-M6, DF1-M6, DF2-M6 technical manual Operation Cont’d

Page 12

OPERATION

OPERATION (Cont’d)

APPROXIMATE CHEMICAL SETTINGS

General

Approximate chemical settings can be obtained by counting the revolutions of the injector rotors.

1.For detergent, one revolution per second equals approximately 0.35% concentration.

NOTE:

Detergent pump only operates when hot water tank is filling.

2.For sanitizer, one revolution in 5 seconds equals approximately 12.5 ppm Iodine or 50 ppm chlorine.

3.For rinse agent, one revolution in 8 seconds is recommended.

To Adjust Detergent Injector:

1.When a new detergent container is installed, push the prime button in and hold until the detergent feed tube is full.

2.Install the detergent tank standpipe and switch tank fill toggle switch up to the “ON-FILL” position. The detergent feeder will now feed detergent into the detergent tank with water fill.

3.To increase detergent volume, turn the detergent adjustment screw clockwise.

4.To decrease the detergent volume, turn the detergent adjustment screw counter-clockwise.

To Adjust Sanitizer Injector:

1.When a new sanitizer container is installed, push the prime button in and hold until sanitizer feed tube is full.

2.Start the washer with rocker switch located on the front of the machine. Take a sample from the final rinse spray tube to check sanitizer level.

3.To increase the volume of sanitizer, turn the adjustment screw clockwise.

4.To decrease the volume of sanitizer, turn the adjustment screw counter-clockwise.

NOTE:

If Iodopher is being used as a sanitizer, it is not necessary to use a separate rinse agent. To turn rinse agent injector “OFF” in this case, turn the adjustment screw counter-clockwise until the pump stops turning.

NOTE:

If a sodium Hypochlorite (Chlorine) based sanitizer at a minimum concentration of 50PPM in the final rinse is used, use chlorine test papers to verify and monitor the 50PPM chlorine level.

10

Image 12
Contents Technical Manual Copyright 2003 by Moyer Diebel Revision History This Intentionally Left Blank Contents Limited Warranty Introduction Welcome to Moyer DiebelInstallation UnpackingInstallation Cont’d Electrical Connections Operation GeneralOperation Cont’d To Adjust Rinse Agent Injector Wash Maintenance CleaningTroubleshooting Condition Cause SolutionReplace pump motor This Intentionally Left Blank Replacement Parts 2625 Main Assembly Item No910 1312 15 16 CONVEYOR/CURTAIN/SWITCH Assembly 24 23 21 Control BOX Control Box Cover/Chemical Injector Board Control BOX COVER/CHEMICAL Injector Board Detergent Tank Detergent Tank Inlet Plumbing Inlet Plumbing Sanitizer Plumbing Sanitizer Plumbing Vacuum Breaker Plumbing Support Vacuum Breaker Plumbing Support Wash Pump Wash Pump Drive Complete Drive Complete Cleaning Accessories Part Electrical Schematics Electrical Diagram S/N 18354 through Electrical Diagram beginning with S/N

DF2-M6, DF1-M6, DF-M6 specifications

The Moyer Diebel DF-M6, DF1-M6, and DF2-M6 are advanced commercial dishwashing machines designed to meet the high demands of the foodservice industry. These models are known for their efficiency, ease of use, and robust construction, making them ideal for restaurants, hotels, and catering services.

One of the standout features of these models is their high capacity, allowing them to process large volumes of dishes per hour. The DF-M6 model, for instance, can handle up to 1,500 dishes in a single hour, ensuring that businesses can keep up with peak service times without compromising on cleanliness. The DF1-M6 and DF2-M6 variants are designed for versatility and can also efficiently wash various types of dinnerware, glassware, and utensils.

The machines incorporate advanced water and energy-saving technologies. They use a unique wash and rinse system that optimizes water usage, reducing overall consumption while still delivering spotless results. This is not only environmentally friendly but also drives down operational costs, making these dishwashers economical options for any establishment.

Another key feature is the intuitive control panel. The user-friendly interface allows for easy operation, enabling staff to quickly set wash cycles according to the load requirements. Additionally, these machines come equipped with adjustable wash arms, providing thorough coverage and ensuring that every dish is effectively cleaned.

Safety and convenience have been prioritized in the design of the DF-M6 series. The machines are constructed with durable, rust-resistant materials, ensuring longevity even under heavy usage. They also feature built-in safety mechanisms such as thermal protection and anti-drip technology, which prevents leaks and excess moisture in the workspace.

The DF-M6, DF1-M6, and DF2-M6 models also include advanced filtration systems that trap food particles and debris, which not only optimizes washing performance but also prolongs the life of the machine. The easy-to-access filtration ensures that maintenance is straightforward, making it simple for operators to keep the machines running smoothly.

In conclusion, the Moyer Diebel DF-M6, DF1-M6, and DF2-M6 dishwashing machines are excellent solutions for high-volume foodservice operations. Their combination of high-capacity performance, advanced technologies, and user-friendly features make them essential assets for anyone looking to enhance their dishwashing efficiency and maintain a high standard of cleanliness.