Installing The Coffeemaker

5.Read carefully the following instructions for installation. Familiarize yourself with the mounting hardware and procedure, before you begin actual installation.

1.Hold the coffeemaker up to the installation site with the front face of the coffeemaker flush with the cabinet face. Visualize the coffeemaker centerline and then lightly pencil mark it on the cabinet (FIGURE A).

2.Measure the depth of the cabinet OVERHANG, if any, and jot it down on the paper mounting template(FIGUREB).Double check you measure- ment.

3.Study the paper mounting template. Note on it the graduated lines next to the line denoting the

COFFEEMAKER FRONT.

4.Find the line which corresponds to the depth of the cabinet OVERHANG -the number you jotted down on the template. Now, doublecheck that you have the correct line and then very carefullly cut along this line (FIGURE C).

NOTE: If there is no overhang then cut along the line marked COFFEEMAKER FRONT.

5.Next, trial fit the trimmed template underneath the cabinet (FIGURE D). Orient it so that the trimmed edge butts against the inside face of the OVERHANG (or if no overhang, then is flush with the front edge of the cabinet). Align the dashed CENTERLINE of the template to your pencil mark on the cabinet.

6.If no cabinet support rib interferes with the template placement then tape template into place flat against the cabinet bottom. If a rib does interfere then it will be necessary for you to cut away that section of the template at the rib and equal to the thickness of the rib.

7.Put on safety glasses. Firmly mark the four drill hole locations shown, on the template with a centerpunch or nail, then remove template.

8.Drill the four l/4” mounting holes. Have firm control of the drill to prevent the bit from skating, and drill slowly straight upward.

9.Drilling sometimes leaves rough edges on the holes. Carefully sand or file the edges smooth.

10.Open the hardware package. Locate the 2 SUPPORT PLATES and place them inside the cabinet, flat side down, aligned over the drillholes. Insert a screw into each hole.

11.Insert one nut into each bracket slot (FIGURE E). Position brackets beneath screws and tighten enough to leave some movement in the brackets for final adjustment.

12.Rotate the vent knob in the rear of the coffeemaker so that the arrow points down (vent open).‘-

13.Gently push the coffeemaker fully up onto the brackets, aligning the brackets with the coffee- maker slots. The coffeemaker will lock into po- sition.

‘CENTERLINE

B. Measure overhang depth.

C. Cut along line denoting your overhang depth.

D. Bottom view

403 Series specifications

The Mr. Coffee 403 Series is a standout coffee maker that exemplifies convenience and reliability for coffee enthusiasts. Designed with the user in mind, this model combines functionality with advanced brewing technologies to deliver a consistently satisfying cup of coffee.

One of the primary features of the Mr. Coffee 403 Series is its ability to brew up to 12 cups of coffee at a time. This volume makes it an ideal choice for families, office settings, or gatherings where multiple guests are present. The spacious glass carafe not only allows for ample coffee storage but also showcases the brewing process, adding aesthetic appeal to any kitchen counter.

The brewing technology integrated into the Mr. Coffee 403 Series includes an effective brewing system that ensures the perfect temperature and time for optimal flavor extraction. This model utilizes a unique brewing cycle that evenly saturates coffee grounds, maximizing their flavor potential. Additionally, the programmable timer feature allows users to set their coffee to brew at any desired time, ensuring that fresh coffee is ready right when they need it.

Another notable characteristic of the Mr. Coffee 403 Series is its user-friendly interface. The machine features an easy-to-read control panel that makes programming a breeze. With simple buttons and clear indicators, users can navigate through the settings without any hassle. Furthermore, the water reservoir includes measurement markings, allowing for precise filling and ensuring the right coffee-to-water ratio every time.

Cleaning and maintenance are also simplified with this model. The removable filter basket allows for easy disposal of used coffee grounds, and the carafe is dishwasher-safe, making cleanup straightforward.

In addition to these essential features, the Mr. Coffee 403 Series is built with durability in mind. The materials used in construction are designed to withstand daily usage, ensuring that this coffee maker will serve users faithfully for years to come.

With its combination of practicality, innovative brewing technology, and user-centered design, the Mr. Coffee 403 Series stands out in a crowded market. It caters to both the casual coffee drinker and the aficionado, making it a versatile addition to any coffee lover's kitchen arsenal. Whether for quiet mornings alone or lively gatherings with friends, the Mr. Coffee 403 Series reliably delivers the rich, flavorful coffee experience users crave.