Mr. Coffee SPR-030308 Brewing Coffee Later, Fresh Brew Timer Feature, To cancel Delay Brew

15-008-707 FT.qxd:Layout 2 3/13/08 5:20 PM Page 14

4. Prior to making a second pot of coffee, turn the		BREWING COFFEE LATER
coffeemaker off. This will reset the FRESH BREW™
TIMER feature. To turn the coffeemaker off, press		1. You must first set the time for when you would
the SELECT button until all lights turn off.		like the coffeemaker to begin brewing your
5. Make sure the decanter is empty before starting		coffee as described in Setting the Clock and
		the Delay Brew Timer section.
to brew coffee.
6. Be sure to turn your coffeemaker off when		2. Prepare your coffeemaker as described in
		Adding Water and Ground Coffee section.
no longer using it.
		3. To activate DELAY BREW and program your
The Fresh Brew™ Timer Feature		coffeemaker to brew coffee at a later time, press
		the SELECT button twice (Figure 9). The yellow
The FRESH BREW TIMER feature displays the time		DELAY BREW light will turn on. The coffeemaker is
		now set to automatically brew coffee at the
since the coffee brewing cycle started. At the start
		pre-set later time. At this time the brew strength
of the brew cycle, the FRESH BREW TIMER feature
		light will turn on. You can select the strength that
will automatically be activated.
		you desire by pressing the BREW STRENGTH button.
Pressing the FRESH BREW TIMER button (Figure 8)		4. At the pre-set time, the green BREW NOW light
will allow you to toggle between the time of day
		will turn on and the DELAY BREW yellow light will
and FRESH BREW TIMER. While on the clock mode,
		turn off, indicating the brewing has started in the
the FRESH BREW TIMER feature will keep counting.
		selected brew strength. The FRESH BREW™ TIMER	FIGURE 9
NOTE: The BREW NOW green light must be on for		feature will start.
the FRESH BREW TIMER feature to operate. The time		5. The coffeemaker warmer plate will keep your
and delay brew time cannot be set when the fresh
		coffee hot for 2 hours and then automatically
brew time is displayed.	FIGURE 8
		turn off. Thermal models will turn off at the
		end of the brew cycle.
		As a safety feature, your coffeemaker will NOT
		start again automatically the next day. If you
		want your coffee to brew at the same time the
		following day, simply add a new filter, coffee
		and water and set DELAY BREW, by repeating
		Steps 2 and 3 above.
		To cancel DELAY BREW:
		Press the SELECT button until all lights turn off
		(Figure 9).

14 15