31
31
ENGLISH PROGRAMMING TIMER WITHOUTVIDEO PLUS
1Press the TTIIMMEERR button kkttwwiiccee
PPrrooggrraammmmiinngg ttiimmeerr wwiitthhoouutt VVIIDDEEOO PPlluuss++2The Timer screen will appear
3If necessary use ==PP--or ;;PP++to select a free
memory location and confirm with TTIIMMEERR k.
DDaaiillyy // wweeeekkllyy rreeccoorrddiinnggss
If you like, you can use SSEELLEECCTTMO-FR for
recordings which are repeated daily or WEEK.
(weekly) for recordings which are repeated each
week on the same day.
WWhhaatt iiss aa mmeemmoorryy llooccaattiioonn??
For technical reasons,your video recorder has access
to a limited number of drawers in which you can
store your programming requirements. Drawers
occupied by programme recording details are only
available for use again after the video recorder has
successfully completed a programmed recording or if
it has been manually deleted.Your video recorder can
store up to six timer programmings.
4Use SS++PPor QQSS--to select the input
field DATE and enter the date of your
desired recording
PPAARRDDOONN??
FFOORR
EEXXPPEERRTTSS
5Use SS++PPor QQSS--to select the input
field PROG. and enter the programme number
under which the video recorder has stored the
desired TV channel
FFOORR
EEXXPPEERRTTSS
AAccttiivvaattee VVPPSS//PPDDCC
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled. In the input field,
START use SSEELLEECCTTto switch recognition of these
signals on (*) or off ( ).
6Use SS++PPor QQSS--to select the input
field START and enter the start time of the
desired recording
2x
TTIIPP
EEnntteerr tthhee vvaalluueess ccoorrrreeccttllyy
Numbers less than 10 must be entered with an
additional 0.Therefore for 9 you must enter 09.
TIMER
VPS
DATE REP. PROG. START PDC END
21 ONCE 01 20:00 * 21:30
REP.PSELECT STOREPOK