Problem solving (VIDEO Plus-Programming)
PROBLEMSOLUTION
Error message:
“SELECT PROG. NR.”
Error message:
“PLUSCODE NUMBER NOT VALID”
A correct PlusCode programming number has been entered - but automatic recognition of the correct TV channel has failed. Please enter the programme number under which your video recorder has stored the desired TV channel using the buttons
The Pluscode programming number entered is incorrect or does not match the date entered. Please enter it again or finish with the STANDBY/ON button m.
|
|
Error message: | The attribute |
| |
POSSIBLE FOR WEEKEND” with the STANDBY/ON button m. | |
Error message:
“SWITCH TO STANDBY - TIMER RECORDING”
Error message:
“NO CASSETTE”
A recording was programmed, but the video recorder was not switched into
timer mode with the standby button m. Press STANDBY/ON min order to make the programmed recording.Warning: if you do not do this, the video recorder will not record.
A recording was programmed, but there is no cassette in the machine. Insert a cassette ready for recording without erase protection.
Error message:
“ALL TIMERS OCCUPIED”
“k” and/or “v” are flashing in the display of the video recorder
All the available memory locations in your video recorder for timer and VIDEO Plus programming are full. Delete a programmed recording (see chapter “Delete a programmed recording”).
A recording was programmed, but there is no cassette in the machine. Insert a cassette ready for recording without erase protection.
A recording was programmed, but the video recorder was not switched into
timer mode with the standby button m. Press STANDBY/ON min order to make the programmed recording.Warning: if you do not do this, the video recorder will not record.
Cassette is ejected after programming
Cassette is ejected during recording
The set cannot be used during recording
Year / month / date / time display appears
A cassette with erase protection was inserted. Please deactivate the erase protection or insert another cassette which is ready for recording.
The end of the tape was reached during a programmed recording.The recording could not be completed satisfactorily.
Once started, a recording can only be interrupted by pressing the STANDBY/ON
button m. WARNING: This will not only stop the recording, but it will also delete the programmed recording from the memory of the video recorder.
The time has not been set or not set correctly. After entering / confirming year, month, date and time, you can continue programming.
PROBLEM SOLVING (VIDEO | 30 | ENGLISH |
|
