3Initial installation
AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
hhhh_______________
PLEASE WAIT...
Setting channel, date and time for the first time
1Using the OK button activate the automatic initial installation
“Aim” correctly |
|
Always point the remote control at the video recorder | TIP |
and not at the TV set. |
2The set seeks out and stores all available TV channels as well as time and date. This procedure may take several minutes. As soon as all the data has been stored, the screen will show the message “STORED”.
The Teletext clock resets automatically |
|
If a TV channel which has Teletext is stored as |
|
programme number P01, the video recorder |
|
automatically takes in the date and time from the text |
|
function.The change from summer to winter time and | TIP |
vice versa should also occur automatically. |
3The initial setting of channel, date and time is completed
8The time is not shown in the display of the video recorder
4While initial installation was going on, the set was unable to recognise the time. Please read the paragraph in Section 4 “Changing the time and
date” to correct this problem | PROBLEM |
|
SETTING CHANNEL, DATE AND TIME | 10 | ENGLISH |
|
