2Connecting the video recorder

Preparing the remote control for operation

1Take the remote control of the video recorder and the enclosed batteries (2 batteries)

2Open the battery compartment, insert the batteries as shown and then close the battery compartment.The remote control is now ready to use

Aerial cable

Mains cable

Scart cable

Connecting to a TV set with a scart socket

1Have the following cables ready: An aerial cable (enclosed), a mains cable (enclosed) and a scart cable

What is a scart cable?

The scart or Euro-AV cable serves as the universal recording and playback connector for picture-, sound- and control signals.With this type of connection, there is practically no loss of quality during the signal transfer. We recommend that you use a scart cable (available

from specialist stores) when using this video recorder. PARDON?

2Switch off your TV set

3Remove the aerial cable plug from the back of

your TV set and insert it into the aerial socket 2 on the back of the video recorder

4Take the enclosed aerial cable and connect

the appropriate ends to the aerial socket of your TV set and to the TV socket 3 on the back of the video recorder

ENGLISH

7

REMOTE CONTROL / CONNECTION WITH A SCART SOCKET

 

Page 7
Image 7
Philips VR 510/07 Connecting the video recorder, Preparing the remote control for operation, What is a scart cable?