ENGLISH SEARCHING FOR A TV CHANNEL MANUALLY
11
11
1Switch on the TV set and - if necessary -
select the programme number set for video
recorder operation
SSeeaarrcchhiinngg ffoorr aa TTVV cchhaannnneell mmaannuuaallllyy
3Use ==PP--or ;;PP++to select the option
MANUAL SEARCH
5Use SS++PP or QQSS--to select the
programme number (e.g.:P01), which you
want to manually allocate to a TV channel
7Use ==PP--or ;;PP++to select the option
CHANNEL NUMBER and use SS++ PP or
QQSS--to enter the number of the TV-
Channel required
2Press the MMEENNUUbutton on the remote
control.The on-screen menu appears
6If you are looking for a special channel, use
==PP-- or ;;PP++to select the option S-
CHANNEL and use SS++ PP or QQSS--to
activate the YES setting. To search for a
normal channel, the NO setting must be
selected
PPAARRDDOONN??
WWhhaatt iiss aa cchhaannnneell,, oorr aa ssppeecciiaall cchhaannnneell??
TV channels are transmitted on precisely-defined
frequency ranges.These ranges are also referred to as
channels. Each channel has its own TV station
allocated to it. Most cable and satellite TV providers
supply tables of channel allocations. Special channels
(hyperband channels) are transmitted on special
frequencies.
In exceptional cases, it may happen that on initial installation the
set does not find all the available TV channels. In this case, the
missing TV channels must be searched for and stored manually.
4Confirm with OOKK
MANUAL SEARCH
PROGRAMME NUMBER QP01P
S-CHANNEL NO.
CHANNEL NUMBER 21
DECODER OFF
TV SYSTEM AUTO
NICAM ON
EXITPMENU STOREPOK
MAIN MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
SPECIAL SETTINGS
OK