Cabela's 51-7403, 08-0601-C manual Cleaning Instructions, Grounding Instructions

Page 5

CLEANING INSTRUCTIONS

WARNING! Before cleaning, assembling or disassembling the Food Slicer, make sure the Food Slicer Motor is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!

WARNING! Before cleaning, assembling or disassembling the Food Slicer, make sure the Food Slicer Motor is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!

HANDLE CAREFULLY!

KEEP FINGERS AWAY FROM THE BLADE!

NEVER FEED FOOD BY HAND.

ALWAYS USE THE FOOD PUSHER!

WARNING!

SHARP BLADE

HANDLE CAREFULLY!

KEEP FINGERS AWAY FROM THE BLADE!

NEVER FEED FOOD BY HAND.

ALWAYS USE THE FOOD PUSHER!

Always use completely assembled Food Slicer

with Food Carriage and Food Pusher.

Protective/cut-resistant Kevlar gloves are recommended

WARNING!

SHARP BLADE

Always use completely assembled Food Slicer

with Food Carriage and Food Pusher.

Protective/cut-resistant Kevlar gloves are recommended

whenever handling the Blade!

whenever handling the Blade!

GROUNDING INSTRUCTIONS

1.

ALWAYS disconnect the appliance from the power source before cleaning.

2.

Never immerse the Motor Assembly of this appliance in water or other liquid.

3.

The Blade, Food Presser, and Food Tray can all be hand washed in hot soapy

water. Because these parts come in contact with food, they should be sanitized by

being dipped in a solution of 2 ounces (0.06 L) of unscented non-chlorine bleach

mixed with 5 gallons (19 L) of water. Allow sanitized parts to air dry. Do not use

harsh abrasives to clean any part of the Food Slicer. Use extreme caution when

handling or cleaning the Blade, as it is extremely sharp! Do not leave Blade

underwater; trying to handle sharp objects in water can be hazardous. It is

highly recommended to wear cut-resistant Kevlar Gloves when removing,

cleaning and re-installing the Blade.

4.

Set the Thickness Adjustment Knob to “0”.

GROUNDING

This appliance must be grounded while in use to protect the operator from electrical shock. The appliance is equipped with a 3-conductor cord and a 3-prong grounding type plug to fit the proper grounding-type receptacle. The appliance has a plug that looks like Figure A. An adaptor, Figure B, should be used for connecting Figure A plugs to two-prong receptacles. The grounding tab which extends from the adaptor must be connected to a permanent ground such as a properly grounded outlet box as shown in Figure C using a metal screw.

Circuit

GroundingFigure A

Conductor

Grounding

Prong

5. Remove Food Presser and rotate the Sliding Food Carriage out of the way in

order to allow for easy access to the Blade.

Figure B

EXTENSION CORDS

6.To remove the Blade hold the Blade with one hand and use a coin to unlock the Blade Locking Screw by turning it clockwise Figure 6. Carefully pull the Blade off and hold it by using the hole in the center of the Blade.

7.Clean the outer surface of the Food Slicer Body & Base with a damp cloth. Mild detergent or water can be used to dampen the cloth. Wipe away from the Blade, NEVER wipe toward the Blade. Never immerse Motor Assembly in water or any other liquid. Do not use steel wool, abrasive cleaners, or sharp utensils to clean.

Figure 6

Rotate clockwise to remove.

Use only 3-wire extension cords which have 3-prong grounding-type plugs and a 3-pole cord connector that accepts the plug from the appliance. Use only extension cords having an electrical rating not less than the rating of the appliance. DO NOT use damaged extension cords. Examine extension cord before using and replace if damaged. DO NOT abuse extension cord and do not yank on any cord to disconnect. Keep cord away from heat and sharp edges.

Metal

Grounding

Screw

Cover of

Grounded

Outlet Box

Figure C

Grounding

Means

AA2220

8.To allow for easier cleaning, the Thickness Adjustment Knob can be turned past “0” to allow the Gauge Plate to slide back. NOTE: Use this feature only with Blade removed. (After cleaning and before reassembly, reset the Thickness Adjustment Knob to “0”.)

9.After cleaning and drying, install the Blade and Blade Screw to the Motor Assembly in reverse order of step 6. Make sure the Blade Locking Screw is properly engaged and tightened. Rotate the Sliding Food Carriage back to its proper position and re- install the Food Presser.

-8-

-5-

Image 5
Contents Model no 08-0601-C Sharp Blade Component List There are basic rules to follow when handling food Important Safeguards Food SafetyGrounding Instructions Cleaning InstructionsOrder to allow for easy access to the Blade Directions for USE Prior to USE
Related manuals
Manual 12 pages 13.24 Kb

51-7403, 08-0601-C specifications

Cabela's 08-0601-C and 51-7403 models represent the essence of outdoor gear innovation, designed with the serious adventurer and outdoorsman in mind. Each product combines functionality and durability, ensuring that users can rely on them in the harshest conditions.

The Cabela's 08-0601-C is a meticulously crafted piece of equipment, designed primarily for hunting enthusiasts. Its material composition features heavy-duty, water-resistant fabric, which ensures that gear stays protected against the elements. One of the standout features is its reinforced stitching and rugged zippers, providing additional durability during extensive use. This product incorporates a spacious main compartment, ideal for storing essential hunting gear, while exterior pockets facilitate organized access to smaller items. The design is also user-friendly, featuring adjustable straps that allow for a customizable fit, making it comfortable for prolonged wear.

On the other hand, the Cabela's 51-7403 is engineered with advanced technologies aimed at enhancing the outdoor experience. This model's insulation technology stands out, both for warmth and for lightweight properties, ensuring that the wearer remains comfortable regardless of the external temperatures. The use of moisture-wicking fabric enhances comfort by keeping sweat at bay, an essential feature during high-energy activities.

Both products emphasize mobility, with each model designed to promote freedom of movement while ensuring all necessary gear is conveniently accessible. This is particularly beneficial for individuals engaging in dynamic activities like hiking or hunting.

Another specific characteristic shared between these models is their eco-friendly manufacturing processes. Cabela's is committed to sustainability, utilizing materials that minimize environmental impact without sacrificing performance. Moreover, both products feature a range of camo patterns, allowing users to blend seamlessly with their surroundings, thus enhancing stealth during outings.

In summary, the Cabela's 08-0601-C and 51-7403 offer outstanding features and technologies that cater to the needs of outdoor enthusiasts. With their focus on durability, comfort, and eco-friendliness, these models are exemplary choices for anyone looking to enhance their outdoor adventures, providing peace of mind while traversing nature's wilderness.