Kraftware Corporation DS-16M2, DS-32M2 Flange to the inside of the channel

Page 14

Installing the DS-16M and DS-32M Rails

3.Adjust the length of the rail to fit between the channels in the rack/cabinet.

NOTE: The rail flanges go to the inside of the channels.

4.Once the rails are adjusted to the correct length, tighten the kep nuts.

NOTE: If the side skins are removed on the rack/cabinet, you can tighten the kep nuts after you install the rails.

5.Align two of the holes of the front rail flange to two holes on the inside of the front channel. The top screw hole is used for the screw; the bottom screw hole is used for the ball stud when installing in a 39U cabinet.

Flange to the inside of the channel

6.If you are installing a switch in a 39U cabinet, secure the rail to a round-hole channel with one M5 x 12 mm pan-head screws and one #10 flat washer and ball stud (see the table on page 3), or secure the rail to a square-hole channel with one square-hole washer and M5 x 16 mm screw and one #10 flat washer and ball stud (see the table on page 3). Leave the screw and ball stud finger-tight. Tighten them after the switch is installed. See the figures below.

NOTE: The ball studs support the bezel.

14

EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide

Image 14
Contents Installation Guide EMC Departmental Switches DS-16M2 and DS-32M2Device Placement Requirements Device Power, Cooling, and Weight InformationDevice Dimensions Switch Mounting Kit DS-16M or DS-32M Component UseTools Required for Installation Installing the DS-16M and DS-32M Rails Front View Rear ViewDS-16M Rails Installation DS-16M Front Flange DS-16M Rear u-shaped FlangeChannel Adjustable rail Top up and to the rack front Switch Latch Repeat steps 1 through 9 for the other rail DS-32M Rails Installation Front Flange Rear FlangeTop up and to the rack/cabinet front Flange to the inside of the channel Step Switch Mounting Rail Repeat steps 1 through 8 for the other rail Installing the DS-16M2 and DS-32M2 Switches Mounting Bracket InstallationInstalling the Switch in the Rack/Cabinet Channel Align hole in bracket with hole in the fixed rail Installing the DS-16M2 and DS-32M2 Switches Plug the other end into available receptacles on the PDU Trademark Information

DS-32M2, DS-16M2 specifications

Kraftware Corporation is renowned for its innovative solutions in the commercial space, and their latest offerings, the DS-16M2 and DS-32M2, stand as testament to their commitment to quality and functionality. These advanced models are designed to meet diverse needs, whether for large parties or intimate gatherings, by providing versatile, efficient, and reliable performance.

The DS-16M2 is engineered to accommodate up to 16 servings, making it an ideal choice for smaller events or meetings. It features a sleek and compact design, ensuring that it fits seamlessly into any space. With an easy-to-use interface, users can control various functions effortlessly. This model is equipped with a robust heating system that guarantees optimal temperature maintenance, ensuring that beverages are served hot or cold as desired.

On the other hand, the DS-32M2 caters to larger crowds, capable of serving up to 32 beverages with ease. This model boasts a larger capacity without compromising on performance or design. The DS-32M2 incorporates advanced technologies that enhance efficiency, including a sophisticated heating mechanism that not only heats drinks quickly but also maintains a consistent temperature throughout service. Both models use energy-efficient components, reducing overall power consumption while retaining high performance.

One of the standout features of the DS-16M2 and DS-32M2 is their built-in safety mechanisms. These include automatic shut-off features that activate when the device is not in use, protecting against overheating and ensuring user safety. Furthermore, easy-to-clean surfaces and removable parts extend the lifespan of the equipment while simplifying the maintenance process.

In terms of construction, both models are built using high-quality materials that withstand the rigors of frequent use. Their sleek designs not only enhance aesthetic appeal but also ensure durability. The user-friendly control panels are intuitive, allowing operators of all skill levels to manage settings with confidence.

In conclusion, the Kraftware Corporation DS-16M2 and DS-32M2 deliver exceptional functionality, safety, and design, making them the perfect choices for anyone looking to enhance their beverage service capabilities. With their versatile features and efficient technology, these models are poised to meet the demands of both casual and formal events, ensuring that every gathering is memorable.