PRECAUTIONS AND MAINTENANCE
.1.This unit is designed for negative ground operation only. The equipment can be used safely, if the negative terminal of the battery is connected to the vehicle metal work.
2.Do not use speakers of impedance less than 4 ohms; and allow the speaker wires to be shorted together when the unit is switched on.
Otherwise it may overload or burn out the power amplifier stage.
3.If the car interior is extremely hot, as after being parked in the sun, do not use the player until the car has been driven for a while to cool off the interior.
4.Take care of your tape cassette to preserve the quality of the recordings. Do not allow them to be exposed to direct sunlight. Store them in a place protected from dirt and dust and avoid handing with greasy or oily hands. Also, keep the away from magnets, and motors of the permanent magnet type.
5.It is not advisable to use cassette tapes longer than
6.The capstan and tape head should be cleaned about once every six months with a soft cloth or
This will serve to maintain the richness and clarity of sound, and prevent loss of volume. Do not use a screwdriver, or ferrous metal rod , in carrying out the above cleaning. See illustration.
7.A loosely wound cassette tape will get damaged. Prior to using such tape, tighten it in a manner as guided by Fig. 2.A carelessly would cassette tape will cause unnecessary pressure on the tape resulting in the cassette springing out while the tape is running .For prevention, rewind the tape through fast for warding or rewinding.
17.RPT/METAL BUTTON
In tape play mode, If a metal tape is used, press METAL button
to make the player in metal play mode, and MTL is indicated on LCD. In CD player mode, press it to play the current track repeatedly. Press it again or eject the disc to cancel this mode.
In CD changer mode, press it to play the current track repeatedly. Press it again to play the current disc repeatedly. Press it thirdly to cancel this mode.
18.RDM/PAUSE BUTTON
In CD player mode, press it to play the track in random order. Press the TRACK + or - button to select another random track. Press it again or eject the disc to cancel this mode.
In CD changer mode, press it to play tracks on the current disc in random order. Press it again to play tracks on the full disc in random order. Press it thirdly to cancel this mode.
In tape mode, press it to pause tape playing, press it again to resume tape playing.
20.RELEASE BUTTON
Press it to detatch the front panel when you want to take it away.
21.BAND BUTTON
Press it to switch from tape, CD player or CD changer mode to radio, and the LCD screen will be shown as below:
FM 1
FM 2 
FM 3 
MW(AM) 1 
MW(AM) 2 