Henkel K-NP manual Henkel, Inc, One Year Limited Warranty

Page 2

Henkel, Inc.

P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171

www.keenovens.com

Model K-NP Holding Ovens

Installation Instructions & Repair Parts List

One Year Limited Warranty

Henkel, Inc. warrants its products against defects in material and workmanship. Henkel, Inc. will either repair or replace without charge any properly installed product which fails under normal operating conditions within one year from date of installation, provided it is returned to our factory, transportation prepaid, and our inspection determined it to be defective under the terms of this warranty. The warranty covers only equipment manufactured by Henkel, Inc., and does not extend to transportation, installation, or replacement charges at the buyers’ facility; nor does it apply to any other equipment of another manufacturer used in conjunction with Henkel, Inc. equipment. No other warranty, expressed or implies exists beyond that included in this statement.

 

Keen Ovens

 

Model K-NP

 

SPECIFICATIONS

Capacity

Boxes 36" Cut Length Material 8 12" wire spools

Volts

120V

Watts

1000 watts

Thermostat

Dial Adjustable

Temperature Range

50ºF-250ºF

Insulation

2" T I W

Interior Dimensions

20"H X 40"W X 20"D

Thermometer

Dial

Gas fitting for Nitrogen Purge

Net Weight

300 lbs.

Shipping Weight

370 lbs.

- 2 -

Image 2
Contents Henkel, Inc Box Hammond, LA 70404 985 One Year Limited Warranty Henkel, IncSafety Precautions General InformationOperation Temperature SettingScheduled Maintenance Guide To StorageIf Oven Overheats Corrective MaintenanceIf Oven Fails to Operate no Heat Changing the Heating ElementRecommended Spare Parts NP Wiring Diagram 120V / 500WThermostat Calibration