Henkel K-50 manual Operation, If Oven Fails to Operate no Heat

Page 4

Do not operate this unit empty.

When using the unit at a distance where an extension cord becomes necessary, a 3-conductor grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating. Use only a UL listed extension cord suitable for outdoor use. Make certain wire size is large enough for A/C amperage rating of unit.

Operation

To load oven, open latch on lid and simply place desired amount of electrodes in oven. The oven capacity is 50 lbs. of 18” electrodes.

To turn on the unit, simply plug the 8’ UL listed power cord into power source of appropriate voltage. Oven may be operated on direct current IF AMPLE VOLTAGE IS AVAILABLE. (Check name plate for voltage.) Unit will not heat to capacity without appropriate voltage.

On 240V models, the plug is not supplied due to the many different receptical configurations in the field. When attaching the plug to the power cord, be sure the plug is an approved component and is rated for the proper voltage and amperage. All units meet electrical code requirements when used with a grounding plug and a grounded receptical.

Temperature Setting

The model K-50 oven is thermostatically controlled oven with a temperature range of 100º-300ºF. The thermostat is factory preset at 275ºF, but it is field adjustable. To change thermostat setting, see “Corrective Maintenance” section.

Guide to Storage

See the enclosed guide to storage. This guide may be used in the absence of storage information from the electrode manufacturer. In critical situations, contact your electrode manufacturer.

Functional Description

The K-50 oven is a portable oven that holds 50 lbs of 18” electrodes. The oven may be used to transfer welding electrodes from a holding oven to a job site or continuously as a small holding oven.

Scheduled Maintenance

The manufacturer recommends that the unit be unloaded and cleaned of debris and dust every three months by removing the plunger from center tube and turning unit upside down and tapping gently on bottom. It is recommended to inspect the power supply cord for damage at this time. Replace cord if damaged.

Troubleshooting

The Keen oven model K-50 requires a minimal amount of electrical knowledge to repair if necessary.

IF OVEN FAILS TO OPERATE – NO HEAT

1.Check power source.

2.Check power cord continuity. Replace cord assembly if faulty.

3.If power supply cord checks out, disconnect oven from power supply and remove bottom cover and insulation.

Image 4
Contents Henkel, Inc Box Hammond, LA 70404 985 One Year Limited Warranty Henkel, IncSafety Precautions Save These Safety InstructionsOperation If Oven Fails to Operate no HeatCorrective Maintenance If Oven OverheatsChanging Element Changing the ThermostatModel K-50 Repair Parts List Thermostat Calibration & AdjustmentAccessories List HENKEL, INC

K-50 specifications

Henkel K-50 is a well-esteemed product in the realm of industrial adhesives, particularly known for its exceptional performance in bonding applications across a range of materials. This adhesive is part of the broader portfolio of Henkel, a leader in adhesive technologies with a legacy of innovation and quality.

One of the main features of Henkel K-50 is its versatility. It effectively bonds various substrates, including plastics, metals, wood, and rubber. This makes it an ideal solution for different industries, including automotive, aerospace, electronics, and consumer goods. Its ability to bond dissimilar materials allows manufacturers to streamline their production processes by relying on a single adhesive solution.

Henkel K-50 is primarily characterized by its ease of application. It comes in a user-friendly format, allowing for accurate dispensing during production. This is crucial for maintaining efficiency and minimizing waste, particularly in high-volume manufacturing settings. The adhesive is often available in various packaging options, including cartridges and bulk containers, to suit different production scales.

Another significant technological aspect of Henkel K-50 is its fast curing time. The adhesive is formulated to develop strong bonds quickly, reducing downtime in manufacturing and speeding up overall production. This property is particularly beneficial in assembly line environments where time efficiency directly impacts operational costs.

The adhesive's resistance to various environmental conditions is also noteworthy. Henkel K-50 exhibits strong resistance to heat, moisture, and chemicals, ensuring enduring performance in challenging applications. This characteristic is vital for industries that demand durability, allowing products bonded with K-50 to withstand rigorous conditions without compromising bond integrity.

Additionally, Henkel K-50 is designed to meet various regulatory standards, ensuring that it is safe for use across different applications. This compliance with industry regulations reflects Henkel's commitment to safety and quality, aligning with best practices in manufacturing.

In summary, Henkel K-50 is a highly versatile industrial adhesive that stands out due to its fast curing time, ease of application, and resilience to environmental factors. Its ability to bond a wide array of materials makes it an indispensable solution for manufacturers seeking reliable and efficient adhesive technologies. With Henkel's reputation for quality, K-50 continues to be a preferred choice for numerous bonding applications across various sectors.