Globe SP8 instruction manual Troubleshooting, Problem Possible Causes Action Required

Troubleshooting

Problem	Possible Causes	Action Required
Mixer will not run.	Timer is not engaged.	Turn timer on by pressing the up arrow
		to a set time.
	Bowl not raised into position.	Raise bowl and lock into position.
	Power not connected properly.	Check all power connections. Plug into
		a live socket. (Do not use extension
		cord!) Test socket with another item.
	Building circuit breaker is off.	Check breaker box.
	Internal overload tripped.	Press the stop button then press reset
		button.
	Gear not engaged.	Switch gear fully into position. (Mixer
		will not operate if the speed control
		lever is positioned in between speeds)
Mixer stops during	Internal overload tripped.	Press the stop button then press reset
mixing.		button.
Mixer is noisy.	Mixer is not installed on level surface.	Adjust surface or relocate mixer.
	Bowl not seated correctly or clamps	Ensure bowl is seated into bowl cradle
	not in place.	correctly and bowl clamps locked into
		place.
	Agitator not fitted properly.	Remove and attach agitator into position
		properly.
	Overloading bowl.	Reduce batch size. (See Capacity Chart)
Mixing time is too long.	Batch size too small.	Increase batch size or use smaller bowl
		adapter kit. (Contact dealer for purchase)
	Incorrect recipe portions or	Follow portions and temperatures per
	temperatures.	recipe instructions.
Bowl raise sticking or	Lack of lubrication and/or cleaning of	Hand wash using mild soap and water, dry,
not operational	bowl slides	and lubricate bowl slides with mineral oil or
		food quality grease. If still sticking, a
		technician must clean bowl raise
		mechanism.
One or more gears not	Damaged or broken gear.	Technician to replace gear. Always
working.		stop mixer before changing speeds!

Page 13